Capacitors. M39003-03 Datasheet

M39003-03 Capacitors. Datasheet pdf. Equivalent

M39003-03 Datasheet
Recommendation M39003-03 Datasheet
Part M39003-03
Description Capacitors
Feature M39003-03; www.vishay.com M39003/03 Vishay Solid-Electrolyte TANTALEX™ Capacitors, Military MIL-PRF-39003/03 .
Manufacture Vishay
Datasheet
Download M39003-03 Datasheet




Vishay M39003-03
www.vishay.com
M39003/03
Vishay
Solid-Electrolyte TANTALEX™ Capacitors,
Military MIL-PRF-39003/03 Qualified, Style CSR23
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 1.2 μF to 1000 μF
Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %
Voltage Rating: 6 VDC to 50 VDC
DESCRIPTION
Solid-electrolyte TANTALEX capacitors to military
specification MIL-PRF-39003 - Exponential and Weibull
Distribution: hermetically sealed, metal cased, axial leaded
tubular capacitors manufactured as military style CSR23.
These capacitors are furnished to the requirements of the
military specification, including marking, testing and
inspection.
In accordance with the specification, all capacitors are
marked with the military part number (M39003/xx-xxxx)
rather than the older style designation (CSRxxxxxxxx) and
should be ordered as such. All capacitors covered by
MIL-PRF-39003 are now ordered with the military part
number as illustrated in the Part Numbering System chart.
Capacitors must not be ordered using the style number
identification.
FEATURES
• Hermetically sealed
• Metal cased
• Axial lead
• Weibull failure rates B, C, D
• Exponential failure rates M, P, R, S
• Tape and reel available per EIA-296 standard
STYLE, MILITARY SPECIFICATION SHEET
Style CSR23, M39003/03 MIL-PRF-39003/3
MIL-PRF-39003 establishes failure rates (expressed in
percent per 1000 h) based on exponential and Weibull
distribution. Care must be exercised in ordering to insure the
part number correctly identifies the desired failure rate level.
In addition, each order for military style CSR13, CSR21,
CSR23 capacitors requiring government inspection must
state whether inspection is to be at the destination or at the
Vishay plant. Orders requiring source inspection cannot be
shipped until this has been accomplished.
Style CS13 capacitors previously shown in MIL-C-26655 are
directly replaced by style CSR13 and style CSR23
capacitors are extended capacitance range versions of
military style CSR13.
For information on the performance characteristics of these
capacitors, please refer to the latest issue of the military
specification.
ORDERING INFORMATION
M39003
/03
BASIC
DOCUMENT NUMBER
SLASH SHEET
-2046
DASH NUMBER
A
SURGE CURRENT
OPTION LETTER
Indicates the Basic
Specification; in this
case MIL-PRF-39003
Indicates the
Specification Sheet
of the Basic Military
Specification
Taken from Ratings
table of the
Specification Sheet
Blank = standard
(no surge current)
A = +25 °C,
after Weibull
B = -55 °C and +85 °C,
after Weibull
C = -55 °C and +85 °C,
before Weibull
D = +25 °C, after Weibull,
high temperature solder
E = -55 °C and +85 °C,
after Weibull, high
temperature solder
F = -55 °C and +85 °C,
before Weibull, high
temperature solder
H = high temperature
solder only (no surge)
Note
(1) See detailed packaging information following the Standard Ratings table
/TR
PACKAGING OPTION (1)
Blank = bulk
/TR = tape and reel
/HR = tape and reel, half reel
/PR = tape and reel, partial reel
/RR = tape and reel, option R
/WR = tape and reel, option W
Revision: 24-Jan-2019
1 Document Number: 40157
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay M39003-03
www.vishay.com
DIMENSIONS in inches [millimeters]
J
1.500 ± 0.250
[38.10 ± 6.35]
M39003/03
Vishay
D
0.094 [2.4]
Max.
L
M
CASE CODE
A
B
C
D
L
± 0.031 [0.79]
0.286 [7.26]
0.474 [12.04]
0.686 [17.42]
0.786 [19.96]
D
+ 0.016 [0.41]
- 0.015 [0.38]
0.135 [3.43]
0.185 [4.70]
0.289 [7.34]
0.351 [8.92]
M
± 0.002 [0.05]
0.020 [0.51]
0.020 [0.51]
0.025 [0.64]
0.025 [0.64]
J
(MAX.)
0.422 [10.72]
0.610 [15.49]
0.822 [20.88]
0.922 [23.42]
Notes
• The case insulation shall extend 0.015" [0.38 mm] minimum beyond each end. However, when a shrink-fitted insulation is used, it shall lap
over the ends of the capacitor body
• A minimum lead length of 1.0" [2.54 mm] for use with tape and reel automatic insertion equipment is available upon request
RATINGS AND CASE CODES
μF
6V
10 V
15 V
20 V
35 V
50 V
1.2 A
1.5 A
1.8 A
2.7 A
3.3 A
3.9 A
4.7 A
5.6 A
B
6.8 A
B
8.2 A
B
10 A
B
12 A
18 B
22 B C
27 B C
33 B C D
39 B C D
47 B
C
56 B
CD
68 B
CD
82 B
C
100 B
C
120 C
150 C D
180 C D
220 C D
270 C D
330 C
D
390 C
D
470 C
D
560 D
680 D
820 D
1000
D
Revision: 24-Jan-2019
2 Document Number: 40157
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay M39003-03
www.vishay.com
M39003/03
Vishay
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PART NO. M39003/03-
FAILURE RATE LEVEL (%/1000 h)
MPR S BC D
1.0 0.1 0.01 0.001 0.1 0.01 0.001
MAX. DCL (μA) AT
+25 °C +85 °C +125 °C
6 VDC AT +85 °C, SURGE = 8 V; 4 VDC AT +125 °C
10
A
10 0101 0201 0301 0401 2001 3001 4001 0.90
9.0
11.0
10
A
20 0102 0202 0302 0402 2002 3002 4002 0.90
9.0
11.0
12 A 10 0103 0203 0303 0403 2003 3003 4003 1.0 10.0 12.5
100 B 10 0104 0204 0304 0404 2004 3004 4004 6.0 60.0 75.0
100 B 20 0105 0205 0305 0405 2005 3005 4005 6.0 60.0 75.0
330
C
10 0106 0206 0306 0406 2006 3006 4006 15.0
150
188
330
C
20 0107 0207 0307 0407 2007 3007 4007 15.0
150
188
390
C
10 0108 0208 0308 0408 2008 3008 4008 15.0
150
188
470
C
10 0109 0209 0309 0409 2009 3009 4009 15.0
150
188
470
C
20 0110 0210 0310 0410 2010 3010 4010 15.0
150
188
680
D
10 0111 0211 0311 0411 2011 3011 4011 20.0
200
250
680
D
20 0112 0212 0312 0412 2012 3012 4012 20.0
200
250
820
D
10 0113 0213 0313 0413 2013 3013 4013 20.0
200
250
1000
D
10 0114 0214 0314 0414 2014 3014 4014 30.0
300
375
1000
D
20 0115 0215 0315 0415 2015 3015 4015 30.0
300
375
10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C
6.8 A 10 0116 0216 0316 0416 2016 3016 4016 1.0 10.0 12.5
6.8 A 20 0117 0217 0317 0417 2017 3017 4017 1.0 10.0 12.5
8.2 A 10 0118 0218 0318 0418 2018 3018 4018 1.2 12.0 15.0
47 B 10 0119 0219 0319 0419 2019 3019 4019 5.0 50.0 63.0
47 B 20 0120 0220 0320 0420 2020 3020 4020 5.0 50.0 63.0
56 B 10 0121 0221 0321 0421 2021 3021 4021 6.0 60.0 75.0
68 B 10 0122 0222 0322 0422 2022 3022 4022 7.0 70.0 88.0
68 B 20 0123 0223 0323 0423 2023 3023 4023 7.0 70.0 88.0
82
B
10 0124 0224 0324 0424 2024 3024 4024 8.0
80.0
100
220
C
10 0125 0225 0325 0425 2025 3025 4025 15.0
150
188
220
C
20 0126 0226 0326 0426 2026 3026 4026 15.0
150
188
270
C
10 0127 0227 0327 0427 2027 3027 4027 15.0
150
188
390
D
10 0128 0228 0328 0428 2028 3028 4028 20.0
200
250
470
D
10 0129 0229 0329 0429 2029 3029 4029 20.0
200
250
470
D
20 0130 0230 0330 0430 2030 3030 4030 20.0
200
250
560
D
10 0131 0231 0331 0431 2031 3031 4031 30.0
300
375
15 VDC AT +85 °C, SURGE = 20 V; 10 VDC AT +125 °C
4.7 A 10 0132 0232 0332 0432 2032 3032 4032 1.0 10.0 12.5
4.7 A 20 0133 0233 0333 0433 2033 3033 4033 1.0 10.0 12.5
5.6 A 10 0134 0234 0334 0434 2034 3034 4034 1.3 13.0 16.5
33 B 10 0135 0235 0335 0435 2035 3035 4035 6.0 60.0 75.0
33 B 20 0136 0236 0336 0436 2036 3036 4036 6.0 60.0 75.0
39 B 10 0137 0237 0337 0437 2037 3037 4037 6.0 60.0 75.0
150
C
10 0138 0238 0338 0438 2038 3038 4038 15.0
150
188
150
C
20 0139 0239 0339 0439 2039 3039 4039 15.0
150
188
180
C
10 0140 0240 0340 0440 2040 3040 4040 15.0
150
188
220
D
10 0141 0241 0341 0441 2041 3041 4041 20.0
200
250
220
D
20 0142 0242 0342 0442 2042 3042 4042 20.0
200
250
270
D
10 0143 0243 0343 0443 2043 3043 4043 20.0
200
250
330
D
10 0144 0244 0344 0444 2044 3044 4044 20.0
200
250
330
D
20 0145 0245 0345 0445 2045 3045 4045 20.0
200
250
MAX. DF (%) AT
-55 °C TO +125 °C
6
6
6
8
8
8
8
10
10
10
10
10
10
10
10
6
6
6
6
6
6
6
6
6
8
8
8
10
10
10
10
4
4
4
6
6
6
8
8
8
8
8
8
8
8
Revision: 24-Jan-2019
3 Document Number: 40157
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)