Capacitors. M39003-09 Datasheet

M39003-09 Capacitors. Datasheet pdf. Equivalent

M39003-09 Datasheet
Recommendation M39003-09 Datasheet
Part M39003-09
Description Capacitors
Feature M39003-09; www.vishay.com M39003/09 Vishay Solid-Electrolyte TANTALEX™ Capacitors, Military MIL-PRF-39003/09 .
Manufacture Vishay
Datasheet
Download M39003-09 Datasheet




Vishay M39003-09
www.vishay.com
M39003/09
Vishay
Solid-Electrolyte TANTALEX™ Capacitors,
Military MIL-PRF-39003/09 Qualified, Style CSR21
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 5.6 μF to 330 μF
Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %
Voltage Rating: 6 VDC to 50 VDC
DESCRIPTION
Solid-electrolyte TANTALEX capacitors to military
specification MIL-PRF-39003 - Exponential and Weibull
Distribution: hermetically sealed, metal cased, axial leaded
tubular capacitors manufactured as military style CSR21.
These capacitors are furnished to the requirements of the
military specification, including marking, testing and
inspection.
In accordance with the specification, all capacitors are
marked with the military part number (M39003/xx-xxxx)
rather than the older style designation (CSRxxxxxxxx) and
should be ordered as such. All capacitors covered by
MIL-PRF-39003 are now ordered with the military part
number as illustrated in the Part Numbering System chart.
Capacitors must not be ordered using the style number
identification.
FEATURES
• Hermetically sealed
• Metal cased
• Axial lead
• Weibull failure rates B, C, D
• Exponential failure rates M, P, R, S
• Low ESR
• 100 % surge current test
• Tape and reel available per EIA-296 standard
STYLE, MILITARY SPECIFICATION SHEET
Style CSR21, M39003/09 MIL-PRF-39003/9
MIL-PRF-39003 establishes failure rates (expressed in
percent per 1000 h) based on exponential and Weibull
distribution. Care must be exercised in ordering to insure the
part number correctly identifies the desired failure rate level.
In addition, each order for military style CSR13, CSR21,
CSR23 capacitors requiring government inspection must
state whether inspection is to be at the destination or at the
Vishay plant. Orders requiring source inspection cannot be
shipped until this has been accomplished.
For information on the performance characteristics of these
capacitors, please refer to the latest issue of the military
specification.
ORDERING INFORMATION
M39003
/09
BASIC
DOCUMENT NUMBER
SLASH SHEET
-2085
DASH NUMBER
B
SURGE CURRENT
OPTION LETTER
Indicates the Basic
Specification; in this
case MIL-PRF-39003
Indicates the
Specification Sheet
of the Basic Military
Specification
Taken from Ratings
table of the
Specification Sheet
Blank = standard, +25 °C,
after Weibull
B = -55 °C and +85 °C,
after Weibull
C = -55 °C and +85 °C,
before Weibull
E = -55 °C and +85 °C,
after Weibull, high
temperature solder
F = -55 °C and +85 °C,
before Weibull, high
temperature solder
H = +25 °C, after Weibull,
high temperature solder
Note
(1) See detailed packaging information following the Standard Ratings table
/TR
PACKAGING OPTION (1)
Blank = bulk
/TR = tape and reel
/HR = tape and reel, half reel
/PR = tape and reel, partial reel
/RR = tape and reel, option R
/WR = tape and reel, option W
Revision: 24-Jan-2019
1 Document Number: 40158
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay M39003-09
www.vishay.com
DIMENSIONS in inches [millimeters]
J
1.500 ± 0.250
[38.10 ± 6.35]
M39003/09
Vishay
D
0.094 [2.4]
Max.
L
M
CASE CODE
L
± 0.031 [0.79]
D
+ 0.016 [0.41]
- 0.015 [0.38]
M
± 0.002 [0.05]
J
(MAX.)
C
0.686 [17.42]
0.289 [7.34]
0.025 [0.64]
0.822 [20.88]
D
0.786 [19.96]
0.351 [8.92]
0.025 [0.64]
0.922 [23.42]
Notes
• The case insulation shall extend 0.015" [0.38 mm] minimum beyond each end. However, when a shrink-fitted insulation is used, it shall lap
over the ends of the capacitor body
• A minimum lead length of 1.0" [2.54 mm] for use with tape and reel automatic insertion equipment is available upon request
RATINGS AND CASE CODES
μF
6V
10 V
15 V
20 V
35 V
50 V
5.6 C
6.8 C
8.2 C
10 C
12 C
15 C
18 C
22 C D
27 C D
33 C D
39 C D
47 C D
56 C D
68 C D
82 C
D
100 C
D
120 C D
150 C
D
180 C
D
220 D
270 D
330 D
Revision: 24-Jan-2019
2 Document Number: 40158
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay M39003-09
www.vishay.com
M39003/09
Vishay
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PART NO. M39003/09-
FAILURE RATE LEVEL (%/1000 h)
MPR S BC D
1.0 0.1 0.01 0.001 0.1 0.01 0.001
MAX. DCL (μA) AT
+25 °C +85 °C +125 °C
MAX.
DF AT
+25 °C
1 kHz
(%)
MAX.
ESR AT
+25 °C
100 kHz
()
DERATED
MAX. RIPPLE
CURRENT
AT +25 °C
(A)
40 kHz 1 kHz
6 VDC AT +85 °C, SURGE = 8 V; 4 VDC AT +125 °C
150
C 5 0001 0101 0201 0301 2001 3001 4001 4.5 90.0 113
10 0.065 3.3 2.0
150
C 10 0002 0102 0202 0302 2002 3002 4002 4.5 90.0 113
10 0.065 3.3 2.0
150
C 20 0003 0103 0203 0303 2003 3003 4003 4.5 90.0 113
10 0.065 3.3 2.0
180
C 5 0004 0104 0204 0304 2004 3004 4004 5.5 110 138
10 0.060 3.4 2.4
180
C 10 0005 0105 0205 0305 2005 3005 4005 5.5 110 138
10 0.060 3.4 2.4
270
D 5 0006 0106 0206 0306 2006 3006 4006 6.5 130 163
10 0.050 4.1 3.4
270
D 10 0007 0107 0207 0307 2007 3007 4007 6.5 130 163
10 0.050 4.1 3.4
330
D 5 0008 0108 0208 0308 2008 3008 4008 7.5 150 188
12 0.045 4.3 3.8
330
D 10 0009 0109 0209 0309 2009 3009 4009 7.5 150 188
12 0.045 4.3 3.8
330
D 20 0010 0110 0210 0310 2010 3010 4010 7.5 150 188
12 0.045 4.3 3.8
10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C
82
C 5 0011 0111 0211 0311 2011 3011 4011 4.0 80.0 100
8 0.085 2.9 1.8
82
C 10 0012 0112 0212 0312 2012 3012 4012 4.0 80.0 100
8 0.085 2.9 1.8
100
C 5 0013 0113 0213 0313 2013 3013 4013 5.0 100 125
8 0.075 3.0 2.2
100
C 10 0014 0114 0214 0314 2014 3014 4014 5.0 100 125
8 0.075 3.0 2.2
100
C 20 0015 0115 0215 0315 2015 3015 4015 5.0 100 125
8 0.075 3.0 2.2
120
C 5 0016 0116 0216 0136 2016 3016 4016 6.0 120 150
8 0.070 3.2 2.5
120
C 10 0017 0117 0217 0317 2017 3017 4017 6.0 120 150
8 0.070 3.2 2.5
180
D 5 0018 0118 0218 0318 2018 3018 4018 9.0 180 226
8 0.060 3.7 3.4
180
D 10 0019 0119 0219 0319 2019 3019 4019 9.0 180 226
8 0.060 3.7 3.4
220
D 5 0020 0120 0220 0320 2020 3020 4020 10.0 200 250
10 0.055 3.9 3.4
220
D 10 0021 0121 0221 0321 2021 3021 4021 10.0 200
250
10 0.055 3.9 3.4
220
D 20 0022 0122 0222 0322 2022 3022 4022 10.0 200
250
10 0.055 3.9 3.4
15 VDC AT +85 °C, SURGE = 20 V; 10 VDC AT +125 °C
56
C 5 0023 0123 0223 0323 2023 3023 4023 4.0 80.0 100
6 0.100 2.6 1.8
56
C 10 0024 0124 0224 0324 2024 3024 4024 4.0 80.0 100
6 0.100 2.6 1.8
68
C 5 0025 0125 0225 0325 2025 3025 4025 5.0 100 125
6 0.095 2.7 2.2
68
C 10 0026 0126 0226 0326 2026 3026 4026 5.0 100 125
6 0.095 2.7 2.2
68
C 20 0027 0127 0227 0327 2027 3027 4027 5.0 100 125
6 0.095 2.7 2.2
120
D 5 0028 0128 0228 0328 2028 3028 4028 9.0 180 226
8 0.070 3.5 2.8
120
D 10 0029 0129 0229 0329 2029 3029 4029 9.0 180 226
8 0.070 3.5 2.8
150
D 5 0030 0130 0230 0330 2030 3030 4030 10.0 200 250
8 0.065 3.6 3.1
150
D 10 0031 0131 0231 0331 2031 3031 4031 10.0 200
250
8 0.065 3.6 3.1
150
D 20 0032 0132 0232 0332 2032 3032 4032 10.0 200
250
8 0.065 3.6 3.1
20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C
27
C 5 0033 0133 0233 0333 2033 3033 4033 2.5 50.0 63.0
5 0.145 2.2 1.2
27
C 10 0034 0134 0234 0334 2034 3034 4034 2.5 50.0 63.0
5 0.145 2.2 1.2
33
C 5 0035 0135 0235 0335 2035 3035 4035 3.5 70.0 88.0
5 0.130 2.3 1.4
33
C 10 0036 0136 0236 0336 2036 3036 4036 3.5 70.0 88.0
5 0.130 2.3 1.4
33
C 20 0037 0137 0237 0337 2037 3037 4037 3.5 70.0 88.0
5 0.130 2.3 1.4
39
C 5 0038 0138 0238 0338 2038 3038 4038 4.0 80.0 100
5 0.120 2.4 1.7
39
C 10 0039 0139 0239 0339 2039 3039 4039 4.0 80.0 100
5 0.120 2.4 1.7
47
C 5 0040 0140 0240 0340 2040 3040 4040 4.5 90.0 113
6 0.110 2.5 1.8
Revision: 24-Jan-2019
3 Document Number: 40158
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)