Barrier Rectifiers. S30C45C Datasheet
Schottky Barrier Rectifiers
Using the Schottky Barrier principle with a Molybdenum barrier metal.
These state-of-the-art geometry features epitaxial construction with oxide
passivation and metal overlay contact. Ideally suited for low voltage, high
frequency rectification, or as free wheeling and polarity protection diodes.
＊Low Switching noise.
＊High Current Capacity
＊Guarantee Reverse Avalanche.
＊Guard-Ring for Stress Protection.
＊Low Power Loss & High efficiency.
＊150℃ Operating Junction Temperature
＊Low Stored Charge Majority Carrier Conduction.
＊Plastic Material used Carries Underwriters Laboratory
＊Flammability Classification 94V-O
＊In compliance with EU RoHs directives
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectifier Forward Current
Total Device (Rated VR), TC=100℃
Non-Repetitive Peak Surge Current (Surge
applied at rate load conditions half-wave,
single phase, 60Hz)
Operating and Storage Junction Temperature
TJ , Tstg
-65 to +150
Maximum Instantaneous Forward Voltage
( IF =15 Amp TC = 25℃)
( IF =15 Amp TC = 125℃)
Maximum Instantaneous Reverse Current
( Rated DC Voltage, TC = 25℃)
( Rated DC Voltage, TC = 125℃)
Symbol Min. Typ. Max. Unit
VF --- 0.53 0.55 V
--- 0.47 ---
IR --- 0.07 0.5 mA
--- 40 ---
A 14.68 16.00
B 9.78 10.42
C 5.02 6.60
D 13.00 14.62
E 3.10 4.19
F 2.41 2.67
G 1.10 1.67
H 0.69 1.01
I 3.21 4.98
J 1.14 1.40
K 2.20 3.30
L 0.28 0.61
M 2.48 3.00
O 3.50 4.00
FIG-1 FORWARD CURRENT DERATING CURVE
FIG-2 TYPICAL FORWARD CHARACTERISTICS
CASE TEMPERATURE (℃)
FIG-3 TYPICAL REVERSE CHARACTERISTICS
REVERSE VOLTAGE (V)
FIG-5 PEAK FORWARD SURGE CURRENT
FORWARD VOLTAGE (Volts)
FIG-4 TYPICAL JUNCTION CAPACITANCE
REVERSE VOLTAGE (Volts)
NUMBER OF CYCLES AT 60 Hz
MOSPEC reserves the rights to make changes of the content herein the document anytime without
notification. MOSPEC or anyone on its behalf, assumes no responsibility or liability for any errors or
inaccuracies. Please refer to MOSPEC website for the last document.
MOSPEC disclaims any and all liability arising out of the application or use of any product
including damages incidentally and consequentially incurred.
Application shown on the herein document are examples of standard use and operation.
Customers are responsible for comprehending suitable use in particular applications. MOSPEC makes
no representation or warranty that such application will be suitable for the specified use without
further testing or modification.
The information contained herein is presented only as a guide for the applications of our products.
No responsibility is assumed by MOSPEC for any infringements of patents or other rights of the third
parties which may result from its use. No license is granted by implication or otherwise under any
patent or patent rights of MOSPEC or others.
These MOSPEC products are intended for usage in general electronic equipment. Please make sure
to consult with MOSPEC before you use these MOSPEC products in equipment which require
specialized quality and/or reliability, and in equipment which could have major impact to the welfare of
human life ( atomic energy control, aeronautics , traffic control, combustion control, safety devices etc.)