Analog Switch. DG2026 Datasheet

DG2026 Switch. Datasheet pdf. Equivalent

DG2026 Datasheet
Recommendation DG2026 Datasheet
Part DG2026
Description Dual SPDT Analog Switch
Feature DG2026; DG2016, DG2026 Vishay Siliconix High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION .
Manufacture Vishay
Datasheet
Download DG2026 Datasheet




Vishay DG2026
DG2016, DG2026
Vishay Siliconix
High-Bandwidth, Low Voltage, Dual SPDT Analog Switches
DESCRIPTION
The DG2016/DG2026 are monolithic CMOS dual
single-pole/double-throw (SPDT) analog switchs. They are
specifically designed for low-voltage, high bandwidth
applications.
The DG2016/DG2026’s on-resistance (3  at 2.7 V),
matching and flatness are guaranteed over the entire analog
voltage range. Wide dynamic performance is achieved with
better than - 80 dB for both cross-talk and off-isolation at
1 MHz.
Both SPDT’s operate with independent control logic,
conduct equally well in both directions and block signals up
to the power supply level when off. Break-before-make is
guaranteed.
With fast switching speeds, low on-resistance, high
bandwidth, and low charge injection, the DG2016/DG2026
are ideally suited for audio and video switching with high
linearity.
Built on Vishay Siliconix’s low voltage CMOS technology, the
DG2016/DG2026 contain an epitaxial layer which prevents
latch-up
FEATURES
Halogen-free according to IEC 61249-2-21
Definition
• Single Supply (1.8 V to 5.5 V)
• Low On-Resistance - RON: 2.4
• Crosstalk and Off Isolation: - 81 dB at 1 MHz
• MSOP-10 Package
• Compliant to RoHS Directive 2002/95/EC
BENEFITS
• Reduced Power Consumption
• High Accuracy
• Reduce Board Space
• Low-Voltage Logic Compatible
• High Bandwidth
APPLICATIONS
• Cellular Phones
• Speaker Headset Switching
• Audio and Video Signal Routing
• PCMCIA Cards
• Low-Voltage Data Acquisition
• ATE
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG2016DQ – MSOP-10
IN1
NO1
GND
NO2
IN2
1
2
3
4
5
10 COM1
9 NC1
8 V+
7 NC2
6 COM2
TRUTH TABLE
Logic
NC1 and NC2
0 ON
1 OFF
NO1 and NO2
OFF
ON
Top View
DG2026DQ – MSOP-10
IN1
NC1
GND
NC2
IN2
1
2
3
4
5
10 COM1
9 NO1
8 V+
7 NO2
6 COM2
Top View
ORDERING INFORMATION
Temp Range
Package
- 40 °C to 85 °C
MSOP-10
Part Number
DG2016DQ-T1-E3
DG2026DQ-T1-E3
Document Number: 72030
www.vishay.com
S11-1185-Rev. D, 13-Jun-11
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay DG2026
DG2016, DG2026
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Parameter
Reference V+ to GND
IN, COM, NC, NOa
Continuous Current (Any terminal)
Peak Current (Pulsed at 1 ms, 10 % duty cycle)
Storage Temperature (D Suffix)
Power Dissipation (Packages)b
MSOP-10c
Limit
- 0.3 to + 6
- 0.3 to (V+ + 0.3)
± 50
± 200
- 65 to 150
320
Unit
V
mA
°C
mW
Notes:
a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 4 mW/°C above 70 °C.
SPECIFICATIONS (V+ = 3 V)
Parameter
Analog Switch
Analog Signal Ranged
On-Resistance
RON Flatness
Switch Off
Leakage Currentf
Channel-On
Leakage Currentf
Digital Control
Input High Voltaged
Input Low Voltage
Input Capacitance
Input Current
Dynamic Characteristics
Turn-On Time
Turn-Off Time
Break-Before-Make Time
Charge Injectiond
Off-Isolationd
Crosstalkd
NO, NC Off Capacitanced
Channel-On Capacitanced
Power Supply
Power Supply Current
Symbol
VNO, VNC
VCOM
RON
RON
Flatness
INO(off)
INC(off)
ICOM(off)
ICOM(on)
VINH
VINL
Cin
IINL or IINH
tON
tOFF
td
QINJ
OIRR
XTALK
CNO(off)
CNC(off)
CNO(on)
CNC(on)
I+
Test Conditions
Otherwise Unless Specified
V+ = 3 V, ± 10 %, VIN = 0.4 V or 2 Ve
Temp.a
Full
V+ = 2.7 V, VCOM = 0.2 V/1.5 V, INO, INC = 10 mA
Room
Full
V+ = 2.7 V, VCOM = 0 to V+, INO, INC = 10 mA Room
V+ = 3.3 V
VNO, VNC = 0.3 V/3 V, VCOM = 3 V/0.3 V
V+ = 3.3 V, VNO, VNC = VCOM = 0.3 V/3 V
Room
Full
Room
Full
Room
Full
VIN = 0 V or V+
VNO or VNC = 2 V, RL = 50 , CL = 35 pF
CL = 1 nF, VGEN = 0 V, RGEN = 0
RL = 50 , CL = 5 pF, f = 1 MHz
VIN = 0 V or V+, f = 1 MHz
Full
Full
Full
Full
Room
Full
Room
Full
Full
Room
Room
Room
Room
Room
Room
Room
VIN = 0 V or V+
Full
Limits
- 40 °C to 85 °C
Min.b Typ.c Max.b
0
3
-1
- 10
-1
- 10
-1
- 10
V+
4.8
5.3
1.6
1
10
1
10
1
10
1.6
0.4
5
11
28 53
59
13 38
38
1
38
- 78
- 82
15
15
49
45
0.01 1
Unit
V
nA
V
pF
µA
ns
pC
dB
pF
µA
www.vishay.com
Document Number: 72030
2 S11-1185-Rev. D, 13-Jun-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay DG2026
DG2016, DG2026
Vishay Siliconix
SPECIFICATIONS (V+ = 5 V)
Parameter
Symbol
Test Conditions
Otherwise Unless Specified
V+ = 5 V, ± 10 %, VIN = 0.8 V or 2.4 Ve
Temp.a
Limits
- 40 °C to 85 °C
Min.b Typ.c Max.b
Unit
Analog Switch
Analog Signal Ranged
On-Resistance
RON Flatness
VNO, VNC
VCOM
RON
RON
Flatness
V+ = 4.5 V, VCOM = 3 V, INO, INC = 10 mA
V+ = 4.5 V, VCOM = 0 to V+, INO, INC = 10 mA
Full
Room
Full
Room
0
V+ V
2.4 4
4.3
1.2
Switch Off
Leakage Current
INO(off)
INC(off)
ICOM(off)
V+ = 5.5 V
VNO, VNC = 1 V/4.5 V, VCOM = 4.5 V/1 V
Room
Full
Room
Full
-1
- 10
-1
- 10
1
10
1
10
nA
Channel-On
Leakage Current
ICOM(on)
V+ = 5.5 V, VNO, VNC = VCOM =1 V/4.5 V
Room - 1
Full - 10
1
10
Digital Control
Input High Voltaged
Input Low Voltage
Input Capacitance
VINH
VINL
Cin
Full 2
Full
Full
V
0.8
5 pF
Input Current
Dynamic Characteristics
IINL or IINH
VIN = 0 V or V+
Full 1
1 µA
Turn-On Time
Turn-Off Time
tON
tOFF
VNO or VNC = 3 V, RL = 50 , CL = 35 pF
Room
Full
Room
Full
23 48
52
8 33 ns
35
Break-Before-Make Time
Charge Injectiond
td
QINJ
CL = 1 nF, VGEN = 0 V, RGEN = 0
Full
Room
1
79
pC
Off-Isolationd
Crosstalkd
OIRR
XTALK
RL = 50 , CL = 5 pF, f = 1 MHz
Room
Room
- 81
- 82
dB
Source-Off Capacitanced
Channel-On Capacitanced
Power Supply
CNO(off)
CNC(off)
CNO(on)
CNC(on
VIN = 0 V or V+, f = 1 MHz
Room
Room
Room
Room
14
14
48
44
pF
Power Supply Range
V+
1.8 5.5 V
Power Supply Current
I+
VIN = 0 V or V+
Full 0.01 1 µA
Notes:
a. Room = 25 °C, Full = as determined by the operating suffix.
b. Typical values are for design aid only, not guaranteed nor subject to production testing.
c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
d. Guarantee by design, nor subjected to production test.
e. VIN = input voltage to perform proper function.
f. Guaranteed by 5 V leakage testing, not production tested.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Document Number: 72030
www.vishay.com
S11-1185-Rev. D, 13-Jun-11
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)