Analog Switches. DG467 Datasheet

DG467 Switches. Datasheet pdf. Equivalent

DG467 Datasheet
Recommendation DG467 Datasheet
Part DG467
Description High Voltage SPST Analog Switches
Feature DG467; DG467, DG468 Vishay Siliconix Low Power, High Voltage SPST Analog Switches DESCRIPTION The DG467 an.
Manufacture Vishay
Datasheet
Download DG467 Datasheet




Vishay DG467
DG467, DG468
Vishay Siliconix
Low Power, High Voltage SPST Analog Switches
DESCRIPTION
The DG467 and DG468 are dual supply single-pole/single-
throw (SPST) switches. On resistance is 10 max. and
flatness is 2 max. over the specified analog signal range.
These analog switches were designed to provide high
speed, low error switching of precision analog signals. The
primary application areas are in the routing and switching in
telecommunications and test equipment. Combining low
power, low leakages, low on-resistance and small physical
size, the DG467/468 are also ideally suited for portable and
battery powered industrial and military equipment.
The DG467 has one normally closed switch, while the
DG468 switch is normally open. They operate either from a
single + 7 V to 36 V supply or from dual ± 4.5 V to ± 20 V
supplies. They are offered in the very popular, small TSOP6
package.
FEATURES
• ± 15 V Analog Signal Range
• On-Resistance - RDS(on): 10 max.
• Fast Switching Action - TON: 100 ns
• VL Logic Supply Not Required
• TTL CMOS Input Compatible
• Rail To Rail Signal Handling
• Dual Or Single Supply Operation
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
BENEFITS
• Wide Dynamic Range
• Low Signal Errors and Distortion
• Break-Befor-Make Switching Action
• Simple Interfacing
• Reduced Board Space
• Improved Reliability
APPLICATIONS
• Precision Test Equipment
• Precision Instrumentaion
• Communications Systems
• PBX, PABX Systems
• Audio Equipment
• Redundant Systems
• PC Multimedia Boards
• Hard Disc Drivers
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG467
NC 1
V- 2
IN 3
TSOP6
DG468
6 COM
5 V+
4 GND
TRUTH TABLE
Logic
0
1
Logic "0" 0.8 V
Logic "1" 2.4 V
Device Marking:
DG467DV = G7xxx
DG468DV = G8xxx
DG467
ON
OFF
DG468
OFF
ON
NO 1
V- 2
IN 3
TSOP6
6 COM
5 V+
4 GND
Document Number: 74413
For technical questions, contact: analogswitchtechsuoort@vishay.com
www.vishay.com
S12-2269–Rev. D, 24-Sep-12
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay DG467
DG467, DG468
Vishay Siliconix
ORDERING INFORMATION
Temp Range
Package
DG467/DG468
- 40 °C to 85 °C
6-Pin TSOP
DG467DV-T1-E3
DG468DV-T1-E3
Part Number
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
Parameter Referenced To V-
Symbol
Limit
Unit
V+ 44
GND
Digital Inputsa, VNO/NC, VCOM
25
(V-) - 2 to (V+) + 2
or 30 mA, whichever occurs first
V
Current, (Any Terminal) Continuous
Current (NO or NC or COM) Pulsed at 1 ms, 10 % duty cycle
30
mA
100
Storage Temperature
- 65 to 150
°C
Power Dissipation (Package)b
6-Pin TSOPc
570 mW
Notes:
a. Signals on NO, NC, COM, or IN exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 7 mW/°C above 70 °C.
www.vishay.com
For technical questions, contact: analogswitchtechsuoort@vishay.com
Document Number: 74413
2 S12-2269–Rev. D, 24-Sep-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay DG467
DG467, DG468
Vishay Siliconix
SPECIFICATIONSa (V ± = ± 15 V)
Parameter
Analog Switch
Analog Signal Rangeeron
Drain-Source
On-Resistance
On-Resistance Flatness
Switch Off Leakage Current
Channel On Leakage Current
Digital Control
Input, High Voltage
Input, Low Voltage
Input Capacitancee
Input Current
Dynamic Characteristics
Turn-On Time
Turn-Off Time
Charge Injectione
Off-Isolatione
Source Off Capacitancee
Drain Off Capacitancee
Channel On Capacitancee
Power Supplies
Positive Supply Current
Negative Supply Current
Symbol
VANALOG
RON
RON
Flatness
INO/NC(off)
ICOM(off)
ICOM(on)
VINH
VINL
CIN
IIN
tON
tOFF
Q
OIRR
CS(off)
CD(off)
CD(on)
I+
I-
Test Conditions
Unless Otherwise Specified
V+ = 15 V, V- = - 15 V
VIN = 2.4 V, 0.8 Vf
INO/NC = 10 mA, VCOM = 10 V
V+ = 13.5 V, V- = - 13.5 V
INO/NC = 10 mA, VCOM = ± 5 V, 0 V
V+ = 13.5 V, V- = - 13.5 V
V+ = 16.5, V- = - 16.5 V
VCOM = ± 15.5 V
VNO/NC = -/+ 15.5 V
V+ = 16.5 V, V- = - 16.5
VCOM = VNO/NC = ± 15.5 V
VIN = 0 or 5 V
RL = 300 , CL = 35 pF
VNO/NC = ± 10 V
CL = 1 nF, Vgen = 0 V, Rgen = 0
CL= 5 pF, RL = 50 , f = 1 MHz
f = 1 MHz
f = 1 MHz
V+ = 16.5 V, V- = - 16.5 V
VIN = 0 or 5 V
D Suffix
- 40 °C to 85 °C
Temp.b Min.d Typ.c Max.d Unit
Full - 15
15 V
Room
Full
Room
Full
79
10
0.7 1
2
Room - 1
- 0.1
1
Full - 10
10
Room - 1
- 0.1
1
Full - 10
10 nA
Room
Full
-1
- 10
- 0.1
1
10
Full 2.4
Full
V
0.8
Room
5
pF
- 1 1 µA
Room
Full
Room
Full
Room
Room
Room
Room
Room
100 140
160
50 80 ns
100
21 pC
- 61 dB
30
15 pF
76
Room
5 15
Full 20
µA
Room - 1 - 0.02
Full - 10
Document Number: 74413
For technical questions, contact: analogswitchtechsuoort@vishay.com
www.vishay.com
S12-2269–Rev. D, 24-Sep-12
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)