IR Receiver
www.vishay.com
TSDP341.., TSDP343..
Vishay Semiconductors
IR Receiver Modules for Data Transmission
1 2 3
DESIGN SUPP...
Description
www.vishay.com
TSDP341.., TSDP343..
Vishay Semiconductors
IR Receiver Modules for Data Transmission
1 2 3
DESIGN SUPPORT TOOLS AVAILABLE 3D 3D
3D Models
MECHANICAL DATA Pinning for TSDP341.., TSDP343..: 1 = OUT, 2 = GND, 3 = VS
16672
FEATURES Very low supply current
Continuous data rates up to 7777 bps
Range up to 32 m
Photo detector and preamplifier in one package
Internal filter tuned to 38.4 kHz for 4800 bps or 57.6 kHz for 9600 bps
Shielding against EMI
Supply voltage: 2.5 V to 5.5 V
Immunity against ambient light
Insensitive to supply voltage ripple and noise
Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
DESCRIPTION
These products are miniaturized receivers for low speed infrared data transmission. A PIN diode and a preamplifier are assembled on a lead frame, the epoxy package contains an IR filter.
The demodulated output can be directly connected to a UART or a microprocessor. The TSDP34138 may be used for continuous reception of data according to RS-232 at 4800 bps in noise free environments. Higher data rate RS-232 may require data monitoring of gain levels. Non RS-232 codings may be used to achieve continuous average data rates up to 7800 bps in noisy ambients.
This component has not been qualified according to automotive specifications.
PARTS TABLE
AGC
Carrier frequency
Package Pinning
38.4 kHz 57.6 kHz
Dimensions (mm)
Mounting Application
LOW NOISE ENVIRONMENTS (AGC1)
NOISY ENVIRONMENTS (A...
Similar Datasheet