STM32L010K8

STM32L010K8 STM32L010R8 Value line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, 64-Kbyte Flash memory, 8-Kbyte SRAM, 256-byte EEPROM, ADC Datasheet - production data Features Ultra-low-power platform – 1.8 V to 3.6 V power supply – –40 to 85 °C temperature range – 0.27 µA Standby mode (2 wakeup pins) – 0.4 µA Stop mode (16 wakeup lines) – 0.8 µA Stop mode + RTC + 8-Kbyte RAM retention – Down to 88 µA/MHz in Run mode – 5 µs wakeup time (from Flash memory) – 41 µA 12-bit ADC conversion at 10 ksps Core: Arm® 32-bit Cortex®-M0+ – From 32 kHz to 32 MHz – 0.95 DMIPS/MHz Reset and supply management – Ultra-low-power BOR (brownout reset) with 5 selectable thresholds – Ultra-low-power POR/PDR Clock sources – 0 to 32 MHz external clock – 32 kHz oscillator for RTC with calibration – High-speed internal 16 MHz factory-trimmed RC (±1%) – Internal low-power 37 kHz RC – Internal multispeed low-power 65 kHz to 4.2 MHz RC – PLL for CPU clock Pre-programmed bootloader – USART, SPI supported Development support – Serial wire debug supported Up to 51 fast I/Os (45 I/Os 5-Volt tolerant) Memories – 64-Kbyte Flash memory – 8-Kbyte RAM – 256 bytes of data EEPROM – 20-byte backup register – Sector protection against R/W operation LQFP32 7 x 7 mm LQFP64 10 x 10 mm Analog peripherals – 12-bit ADC 1.14 Msps up to 16 channels (down to 1.8 V) 7-channel DMA controller, supporting ADC, SPI, I2C, USART and timers 4x peripherals communication interface 1x USART (ISO7816), 1x LP...