SIGNAL MICROCONTROLLER. MSP430F2471 Datasheet

MSP430F2471 MICROCONTROLLER. Datasheet pdf. Equivalent

MSP430F2471 Datasheet
Recommendation MSP430F2471 Datasheet
Part MSP430F2471
Description MIXED SIGNAL MICROCONTROLLER
Feature MSP430F2471; www.ti.com MSP430F23x MSP430F24x(1) MSP430F2410 SLAS547I – JUNE 2007 – REVISED DECEMBER 2012 MIXED .
Manufacture etcTI
Datasheet
Download MSP430F2471 Datasheet




Texas Instruments MSP430F2471
www.ti.com
MSP430F23x
MSP430F24x(1)
MSP430F2410
SLAS547I – JUNE 2007 – REVISED DECEMBER 2012
MIXED SIGNAL MICROCONTROLLER
FEATURES
1
23 Low Supply-Voltage Range, 1.8 V to 3.6 V
• Ultra-Low Power Consumption
– Active Mode: 270 µA at 1 MHz, 2.2 V
– Standby Mode (VLO): 0.3 µA
– Off Mode (RAM Retention): 0.1 µA
• Ultra-Fast Wake-Up From Standby Mode in
Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
Cycle Time
• Basic Clock Module Configurations:
– Internal Frequencies up to 16 MHz
– Internal Very Low-Power LF Oscillator
– 32-kHz Crystal
– Internal Frequencies up to 16 MHz With
Four Calibrated Frequencies to ±1%
– Resonator
– External Digital Clock Source
– External Resistor
• 12-Bit Analog-to-Digital (A/D) Converter With
Internal Reference, Sample-and-Hold, and
Autoscan Feature
• 16-Bit Timer_A With Three Capture/Compare
Registers
• 16-Bit Timer_B With Seven Capture/Compare
With Shadow Registers
• Four Universal Serial Communication
Interfaces (USCI)
– USCI_A0 and USCI_A1
– Enhanced UART Supporting Auto-Baudrate
Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0 and USCI_B1
– I2C™
– Synchronous SPI
• On-Chip Comparator
• Supply Voltage Supervisor/Monitor With
Programmable Level Detection
• Brownout Detector
• Bootstrap Loader
• Serial Onboard Programming, No External
Programming Voltage Needed, Programmable
Code Protection by Security Fuse
• Family Members Include:
– MSP430F233
– 8KB+256B Flash Memory,
– 1KB RAM
– MSP430F235
– 16KB+256B Flash Memory
– 2KB RAM
– MSP430F247, MSP430F2471 (1)
– 32KB+256B Flash Memory
– 4KB RAM
– MSP430F248, MSP430F2481
– 48KB+256B Flash Memory
– 4KB RAM
– MSP430F249, MSP430F2491
– 60KB+256B Flash Memory
– 2KB RAM
– MSP430F2410
– 56KB+256B Flash Memory
– 4KB RAM
• Available in 64-Pin QFP and 64-Pin QFN
Packages (See Available Options)
• For Complete Module Descriptions, See
MSP430x2xx Family User’s Guide (SLAU144)
(1) The MSP430F24x1 devices are identical to the MSP430F24x
devices, with the exception that the ADC12 module is not
implemented on the MSP430F24x1.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MSP430 is a trademark of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2012, Texas Instruments Incorporated



Texas Instruments MSP430F2471
MSP430F23x
MSP430F24x(1)
MSP430F2410
SLAS547I – JUNE 2007 – REVISED DECEMBER 2012
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
DESCRIPTION
The Texas Instruments MSP430™ family of ultra-low power microcontrollers consists of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes, is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The calibrated digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less
than 1 µs.
The MSP430F23x, MSP430F24x(1), and MSP430F2410 series are microcontroller configurations with two built-
in 16-bit timers, a fast 12-bit A/D converter (not MSP430F24x1), a comparator, four (two in MSP430F23x)
universal serial communication interface (USCI) modules, and up to 48 I/O pins. The MSP430F24x1 devices are
identical to the MSP430F24x devices, with the exception that the ADC12 module is not implemented. The
MSP430F23x devices are identical to the MSP430F24x devices, with the exception that a reduced Timer_B, one
USCI module, and less RAM are integrated.
Typical applications include sensor systems, industrial control applications, and hand-held meters.
TA
-40°C to 105°C
Table 1. Available Options
PACKAGED DEVICES(1)(2)
PLASTIC 64-PIN QFP (PM)
PLASTIC 64-PIN QFN (RGC)
MSP430F233TPM
MSP430F233TRGC
MSP430F235TPM
MSP430F235TRGC
MSP430F247TPM
MSP430F247TRGC
MSP430F2471TPM
MSP430F2471TRGC
MSP430F248TPM
MSP430F248TRGC
MSP430F2481TPM
MSP430F2481TRGC
MSP430F249TPM
MSP430F249TRGC
MSP430F2491TPM
MSP430F2491TRGC
MSP430F2410TPM
MSP430F2410TRGC
(1) For the most current package and ordering information, see the Package Option Addendum at the end
of this document, or see the TI web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
Development Tool Support
All MSP430 microcontrollers include an Embedded Emulation Module (EEM) allowing advanced debugging and
programming through easy to use development tools. Recommended hardware options include the following:
• Debugging and Programming Interface
– MSP-FET430UIF (USB)
– MSP-FET430PIF (Parallel Port)
• Debugging and Programming Interface with Target Board
– MSP-FET430U64 (PM package)
• Standalone Target Board
– MSP-TS430PM64 (PM package)
• Production Programmer
– MSP-GANG430
2 Submit Documentation Feedback
Copyright © 2007–2012, Texas Instruments Incorporated



Texas Instruments MSP430F2471
www.ti.com
Device Pinout, MSP430F23x
PM OR RGC PACKAGE
(TOP VIEW)
MSP430F23x
MSP430F24x(1)
MSP430F2410
SLAS547I – JUNE 2007 – REVISED DECEMBER 2012
DV
CC
P6.3/A3
P6.4/A4
P6.5/A5
P6.6/A6
P6.7/A7/SVSIN
V
REF+
XIN
XOUT
Ve
REF+
V /Ve
REF-
REF-
P1.0/TACLK/CAOUT
P1.1/TA0
P1.2/TA1
P1.3/TA2
P1.4/SMCLK
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
1 48
2 47
3 46
4 45
5 44
6 43
7 42
8 41
MSP430F23x
9 40
10 39
11 38
12 37
13 36
14 35
15 34
16 33
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
P5.4/MCLK
P5.3
P5.2
P5.1
P5.0
P4.7/TBCLK
P4.6
P4.5
P4.4
P4.3
P4.2/TB2
P4.1/TB1
P4.0/TB0
P3.7
P3.6
P3.5/UCA0RXD/UCA0SOMI
Copyright © 2007–2012, Texas Instruments Incorporated
Submit Documentation Feedback
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)