MIXED SIGNAL MICROCONTROLLER
MSP430F249-EP MIXED SIGNAL MICROCONTROLLER
SLAS584C − OCTOBER 2008 − REVISED JULY 2010
D Low Supply-Voltage Range, 1.8...
Description
MSP430F249-EP MIXED SIGNAL MICROCONTROLLER
SLAS584C − OCTOBER 2008 − REVISED JULY 2010
D Low Supply-Voltage Range, 1.8 V to 3.6 V D Ultra-Low Power Consumption:
− Active Mode: 270 μA at 1 MHz, 2.2 V − Standby Mode (VLO): 0.3 μA − Off Mode (RAM Retention): 0.1 μA
D Ultra-Fast Wake-Up From Standby Mode in
Less Than 1 μs
D 16-Bit RISC Architecture, 62.5-ns
Instruction Cycle Time
D Basic Clock Module Configurations:
− Internal Frequencies up to 16 MHz − Internal Very Low Power LF Oscillator − 32-kHz Crystal (−405C to 1055C only) − Internal Frequencies up to 16 MHz With
Four Calibrated Frequencies to +1% − Resonator − External Digital Clock Source − External Resistor
D 12-Bit Analog-to-Digital (A/D) Converter
With Internal Reference, Sample-and-Hold, and Autoscan Feature
D 16-Bit Timer_A With Three
Capture/Compare Registers
D 16-Bit Timer_B With Seven
Capture/Compare-With-Shadow Registers
† The MSP430F24x1 devices are identical to the MSP430F24x devices, with the exception that the ADC12 module is not implemented.
description
D Four Universal Serial Communication
Interfaces (USCI) − USCI_A0 and USCI_A1
− Enhanced UART Supporting Auto-Baudrate Detection
− IrDA Encoder and Decoder − Synchronous SPI − USCI_B0 and USCI_B1 − I2Ct − Synchronous SPI
D On-Chip Comparator D Supply Voltage Supervisor/Monitor With
Programmable Level Detection
D Brownout Detector D Bootstrap Loader D Serial Onboard Programming,
No External Programming Voltage Needed, Programmable Code Protection by Securit...
Similar Datasheet