DatasheetsPDF.com

TGC4407-SM Dataheets PDF



Part Number TGC4407-SM
Manufacturers Qorvo
Logo Qorvo
Description Ka-Band Upconverter
Datasheet TGC4407-SM DatasheetTGC4407-SM Datasheet (PDF)

TGC4407-SM ® Ka - Band Upconverter Product Description The QORVO TGC4407-SM is a Ka-Band sub-harmonic upconverter with integrated LO buffer amplifier. The TGC4407-SM operates from an RF of 21.5 to 32.5 GHz and is designed using QORVO’s pHEMT production process. The TGC4407-SM typically provides 13 dBm of input TOI at –10 dBm input power per tone and a conversion gain of -9 dB. The TGC4407-SM is available in a low-cost, surface mount 16 lead 3x3mm QFN package and is ideally suited for Pointto-.

  TGC4407-SM   TGC4407-SM



Document
TGC4407-SM ® Ka - Band Upconverter Product Description The QORVO TGC4407-SM is a Ka-Band sub-harmonic upconverter with integrated LO buffer amplifier. The TGC4407-SM operates from an RF of 21.5 to 32.5 GHz and is designed using QORVO’s pHEMT production process. The TGC4407-SM typically provides 13 dBm of input TOI at –10 dBm input power per tone and a conversion gain of -9 dB. The TGC4407-SM is available in a low-cost, surface mount 16 lead 3x3mm QFN package and is ideally suited for Pointto-Point Radio, and Ka-Band VSAT Ground Terminal. Lead-free and RoHS compliant. QFN 3x3 mm 16L Product Features Applications • VSAT • Point-to-Point Radio • Test Equipment & Sensors • RF Frequency Range: 21.5 – 32.5 GHz • Wideband IF Frequency: DC – 7.0 GHz • Sub-Harmonic Pumped LO Frequency: 11 – 16 GHz • LO Input Power: 0 to 7.5 dBm • Conversion Gain: -9 dB • Bias: Vd = 5 V, Id = 65 mA, Typical • Package Dimensions: 3.0 x 3.0 x 0.85 mm Function Block Diagram Ordering Information Part No. Description TGC4407-SM Ka-Band Upconverter TGC4407-SMEVB TGC4407-SM EVB Standard T/R size = 500 pieces on a 7” reel. Data Sheet Rev C. March 9, 2020 | Subject to change without notice 1 of 16 www.qorvo.com TGC4407-SM ® Ka - Band Upconverter Absolute Maximum Ratings Recommended Operating Conditions Parameter Drain Voltage, Vd Drain Current, Id Power Dissipation, Pdiss RF Input Power, CW, 50Ω, T = 25C Channel Temperature, Tch Mounting Temperature (30 seconds) Storage Temperature Rating +7 V 175 mA 1.2 W +10 dBm 200 C 260 C -40 to 150C These are stress ratings only, functional operation of the device at these conditions is not implied. Extended application of Absolute Maximum Rating conditions may reduce device reliability. Operation of this device outside the parameter ranges given above may cause permanent damage. Parameter Operating Temp. Range Vd Id Id_drive (Under RF Drive) Min Typ Max Units -40 +25 +85 C 4 56V 65 mA 76 mA Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Electrical Specifications Test conditions unless otherwise noted: 25ºC, Vd = 5 V, Id = 65 mA Typical. IF = 500 MHz, LO = 0 dBm. LSB = 2 x LO – IF and USB = 2 x LO + IF. Parameter Conditions Min Typ RF Frequency Range 21.5 LO Frequency Range 11 IF Frequency Range DC Conversion Gain -9 Noise Figure 9 2LO-to-RF Isolation, OIP3 35 Input IP3 13 Input 1dB Compression (P1dB) 4 Supply Current 65 Max 31.5 16 7 Units GHz GHz GHz dB dB dB dBm dBm mA Data Sheet Rev C. March 9, 2020 | Subject to change without notice 2 of 16 www.qorvo.com TGC4407-SM ® Ka - Band Upconverter Thermal and Reliability Information Parameter Thermal Resistance, θJC, measured to back of package Channel Temperature (Tch), and Median Lifetime (Tm) Channel Temperature (Tch), and Median Lifetime (Tm) Under RF Drive Conditions Tbase = 85 °C Tbase = 85 °C, Vd = 5 V, Id = 65 mA Pdiss = 0.325 W .


QPA3055P TGC4407-SM TGF2023-2-01


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)