Mixed-Signal Microcontrollers
D Low Supply Voltage Range 1.8 V to 3.6 V D Ultralow-Power Consumption:
− Active Mode: 200 µA at 1 MHz, 2.2 V − Standby ...
Description
D Low Supply Voltage Range 1.8 V to 3.6 V D Ultralow-Power Consumption:
− Active Mode: 200 µA at 1 MHz, 2.2 V − Standby Mode: 0.8 µA − Off Mode (RAM Retention): 0.1 µA
D Wake-Up From Standby Mode in less
than 6 µs
D 16-Bit RISC Architecture, 125 ns
Instruction Cycle Time
D Basic Clock Module Configurations:
− Various Internal Resistors − Single External Resistor − 32 kHz Crystal − High Frequency Crystal − Resonator − External Clock Source
D 16-Bit Timer_A With Three
Capture/Compare Registers
D Serial Onboard Programming,
No External Programming Voltage Needed
MSP430F11x MIXED SIGNAL MICROCONTROLLER
SLAS256D − NOVEMBER 1999 − REVISED SEPTEMBER 2004
D Family Members Include:
MSP430F110: 1KB + 128B Flash Memory
128B RAM
MSP430F112: 4KB + 256B Flash Memory
256B RAM
D Available in a 20-Pin Plastic Small-Outline
Wide Body (SOWB) Package and 20-Pin
Plastic Thin Shrink Small-Outline Package
(TSSOP)
D For Complete Module Descriptions, Refer
to the MSP430x1xx Family User’s Guide,
Literature Number SLAU049
DW OR PW PACKAGE (TOP VIEW)
TEST VCC
P2.5/Rosc VSS
XOUT/TCLK XIN
RST/NMI P2.0/ACLK P2.1/INCLK
P2.2/TA0
1 2 3 4 5 6 7 8 9 10
20 P1.7/TA2/TDO/TDI 19 P1.6/TA1/TDI 18 P1.5/TA0/TMS 17 P1.4/SMCLK/TCK 16 P1.3/TA2 15 P1.2/TA1 14 P1.1/TA0 13 P1.0/TACLK 12 P2.4/TA2 11 P2.3/TA1
description
The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined w...
Similar Datasheet