Mixed-Signal Microcontrollers. MSP430F1132 Datasheet

MSP430F1132 Microcontrollers. Datasheet pdf. Equivalent

Part MSP430F1132
Description Mixed-Signal Microcontrollers
Feature MSP430x11x2, MSP430x12x2 MIXED SIGNAL MICROCONTROLLER D Low Supply Voltage Range 1.8 V to 3.6 V D U.
Manufacture etcTI
Datasheet
Download MSP430F1132 Datasheet



MSP430F1132
MSP430x11x2, MSP430x12x2
MIXED SIGNAL MICROCONTROLLER
D Low Supply Voltage Range 1.8 V to 3.6 V
D Ultralow-Power Consumption:
− Active Mode: 200 µA at 1 MHz, 2.2 V
− Standby Mode: 0.7 µA
− Off Mode (RAM Retention): 0.1 µA
D Five Power Saving Modes
D Wake-Up From Standby Mode in less
than 6 µs
D 16-Bit RISC Architecture, 125 ns
Instruction Cycle Time
D Basic Clock Module Configurations:
− Various Internal Resistors
− Single External Resistor
− 32-kHz Crystal
− High Frequency Crystal
− Resonator
− External Clock Source
D 16-Bit Timer_A With Three
Capture/Compare Registers
D 10-Bit, 200-ksps A/D Converter With
Internal Reference, Sample-and-Hold,
Autoscan, and Data Transfer Controller
D Serial Communication Interface (USART0)
With Software-Selectable Asynchronous
UART or Synchronous SPI
(MSP430x12x2 Only)
SLAS361D − JANUARY 2002 − REVISED AUGUST 2004
D Serial Onboard Programming,
No External Programming Voltage Needed
Programmable Code Protection by
Security Fuse
D Supply Voltage Brownout Protection
D MSP430x11x2 Family Members Include:
MSP430F1122: 4KB + 256B Flash Memory
256B RAM
MSP430F1132: 8KB + 256B Flash Memory
256B RAM
Available in 20-Pin Plastic SOWB, 20-Pin
Plastic TSSOP and 32-Pin QFN Packages
D MSP430x12x2 Family Members Include:
MSP430F1222: 4KB + 256B Flash Memory
256B RAM
MSP430F1232: 8KB + 256B Flash Memory
256B RAM
Available in 28-Pin Plastic SOWB, 28-Pin
Plastic TSSOP, and 32-Pin QFN Packages
D For Complete Module Descriptions, See the
MSP430x1xx Family User’s Guide,
Literature Number SLAU049
description
The Texas Instruments MSP430 family of ultralow-power microcontrollers consist of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low power
modes is optimized to achieve extended battery life in portable measurement applications. The device features
a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6µs.
The MSP430x11x2 and MSP430x12x2 series are ultralow-power mixed signal microcontrollers with a built-in
16-bit timer, 10-bit A/D converter with integrated reference and data transfer controller (DTC) and fourteen or
twenty-two I/O pins. In addition, the MSP430x12x2 series microcontrollers have built-in communication
capability using asynchronous (UART) and synchronous (SPI) protocols.
Digital signal processing with the 16-bit RISC performance enables effective system solutions such as glass
breakage detection with signal analysis (including wave digital filter algorithm). Another area of application is
in stand-alone RF sensors.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2002 − 2004, Texas Instruments Incorporated
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1



MSP430F1132
MSP430x11x2, MSP430x12x2
MIXED SIGNAL MICROCONTROLLER
SLAS361D JANUARY 2002 REVISED AUGUST 2004
AVAILABLE OPTIONS
PACKAGED DEVICES
TA PLASTIC 20-PIN PLASTIC 20-PIN PLASTIC 28-PIN PLASTIC 28-PIN
SOWB (DW)
TSSOP (PW)
SOWB (DW)
TSSOP (PW)
PLASTIC 32-PIN
QFN (RHB)
40°C to 85°C
MSP430F1122IDW
MSP430F1132IDW
MSP430F1122IPW
MSP430F1132IPW
MSP430F1222IDW
MSP430F1232IDW
MSP430F1222IPW
MSP430F1232IPW
MSP430F1122IRHB
MSP430F1132IRHB
MSP430F1222IRHB
MSP430F1232IRHB
pin designation, MSP430x11x2 (see Notes 1, 2 and 3)
DW or PW PACKAGE
(TOP VIEW)
TEST
VCC
P2.5/ROSC
VSS
XOUT
XIN
RST/NMI
P2.0/ACLK/A0
P2.1/INCLK/A1
P2.2/TA0/A2
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
RHB PACKAGE
(TOP VIEW)
P1.7/TA2/TDO/TDI
P1.6/TA1/TDI/TCLK
P1.5/TA0/TMS
P1.4/SMCLK/TCK
P1.3/TA2
P1.2/TA1
P1.1/TA0
P1.0/TACLK/ADC10CLK
P2.4/TA2/A4/VREF+/VeREF+
P2.3/TA1/A3/VREF/VeREF
VSS
XOUT
XIN
NC
RST/NMI
P2.0/ACLK/A0
P2.1/INCLK/A1
P2.2/TA0/A2
1 31 30 29 28 27 26 24
2 23
3 22
4 21
5 20
6 19
7 18
8 10 11 12 13 14 15 17
P1.3/TA2
P1.2/TA1
P1.1/TA0
P1.0/TACLK/ADC10CLK
NC
P2.4/TA2/A4/VREF+/VeREF+
P2.3/TA1/A3/VREF/VeREF
NC
NOTES:
1. NC pins are not internally connected. Recommended connection to VSS.
2. Recommended connection to VSS for all pins labeled Reservedto avoid floating nodes, otherwise increased current
consumption may occur.
3. Power pad connection to VSS recommended.
2 POST OFFICE BOX 655303 DALLAS, TEXAS 75265





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)