Image Sensor. NOM03A6-AY17G Datasheet

NOM03A6-AY17G Sensor. Datasheet pdf. Equivalent

NOM03A6-AY17G Datasheet
Recommendation NOM03A6-AY17G Datasheet
Part NOM03A6-AY17G
Description Image Sensor
Feature NOM03A6-AY17G; NOM03A6- AY17G 300DPI High- Speed Contact Image Sensor Module Description The NOM03A6--AY17G conta.
Manufacture ON Semiconductor
Datasheet
Download NOM03A6-AY17G Datasheet




ON Semiconductor NOM03A6-AY17G
NOM03A6- AY17G
300DPI High- Speed Contact
Image Sensor Module
Description
The NOM03A6--AY17G contact image sensor (CIS) module
integrates a yellow LED light source with reflector, lens and image
sensor in a compact housing. The module is designed for document
scanning, mark reading, gaming and office automation equipment
applications and is suitable for scanning documents up to 104 mm
wide. An analog video output achieves a scanning rate of
250 msec/line. The NOM03A6--AY17G module employs proprietary
CMOS image sensing technology from ON Semiconductor to achieve
high--speed performance and high sensitivity.
Features
Light Source, Lens and Sensor are Integrated Into a Single Module
104 mm Scanning Width at 11.8 dots per mm Resolution
250 msec/Line Scanning Speed @ 5.0 MHz Pixel Rate
Analog Video Output
Supports A6 Paper Size at up to 138 Pages per Minute
Yellow LED Light Source with Reflector
Wide Dynamic Range
Compact 119.7 mm x 19.0 mm x 13.7 mm Module Housing
Low Power
Light Weight 1.1 oz Packaging
These Devices are Pb--Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
Ticket, Check and Card Scanners
Receipt Scanners
Mark Readers
Office Automation Equipment
Contact Image
Sensor Module
Analog to Digital
Converters
DSP
LED Drivers
Parallel Port
Transceiver
Paper Insertion
Sensing Switch
Scan System
Timing and Control
Motor
Motor Controller
and Driver
Figure 1. Typical Scanner Application
http://onsemi.com
IMAGE SENSOR MODULE A6
CASE MODAF
MARKING DIAGRAM
NOM03A6--AY17G
YYMMSSSSSS
YY
MM
SSSSSS
G
= Year
= Month
= Serial Number
= Pb--Free Package
CONNECTOR PIN ASSIGNMENT
1 2 3 4 5 6 7 8 9 10
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2010
June, 2010 -- Rev. 0
1
Publication Order Number:
NOM03A6--AY17G/D



ON Semiconductor NOM03A6-AY17G
Table 1. ORDERING INFORMATION
Part Number
NOM03A6--AY17G
NOM03A6--AY17G
Package
(Pb--free)
Shipping Configuration
100 per packing carton
VLED
GLED
VDD (+5 V)
GND
VSS (--5 V)
SP
CP
Buf
Buf
Yellow LED Light Bar
Rod Lens
Photo Sensor Array
1234
1248
Shift Register
Pixel 1 corresponds to connector end of the module
Figure 2. Simplified Block Diagram
Amp
Table 2. PIN FUNCTION DESCRIPTION
Pin Pin Name
1
VOUT
Analog Video Output
2
GND
Ground
3
VDD
+5 V power supply
4
VSS
--5 V to --12 V power supply
5
GND
Ground
6 SP Shift register start pulse
7
GND
Ground
8 CP Sampling clock pulse
9
GLED
Ground for the LED light source
10
VLED
Power supply for the LED light source
Description
VOUT
http://onsemi.com
2



ON Semiconductor NOM03A6-AY17G
NOM03A6--AY17G
Table 3. ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Value
Unit
Power supply voltage
VDD
7
V
VSS --15
V
VLED
6
V
Power supply current
ILED 450 mA
Input voltage range for SP, CP
Vin --0.5 to VDD + 0.5
V
Storage Temperature
TSTG
--20 to 75
°C
Storage Humidity, Non--Condensing
HSTG
10 to 90
%
ESD Capability, Contact Discharge (Note 1)
ESDHBM
±2
kV
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. This module assembly has been ESD tested to IEC61000--4--2 (HBM) Contact Discharge
Table 4. RECOMMENDED OPERATING RANGES (Unless otherwise specified, these specifications apply TA = 25°C) (Note 2)
Parameter
Symbol
Min
Typ
Max Unit
Power supply voltage (Note 3)
Power supply current
Low level input voltage for SP, CP
High level input voltage for SP, CP
Line scanning rate (Note 4)
Clock frequency (Note 5)
VDD
VSS
VLED
IDD
ISS
ILED
VIL
VIH
Tint
f
4.5
--12
4.5
20
5
250
0
4.5
227
2.0
5 5.5 V
--5 --4.5 V
5 5.5 V
30 40 mA
6 7 mA
300 350 mA
0 0.8 V
5.0
VDD + 0.3
V
250 624 ms
5.0 5.5 MHz
Clock period
to 182 200 500 ns
Clock pulse width (Note 6)
tw 46
50 125 ns
Clock pulse high duty cycle
DCCP
20
25
60 %
Start pulse width (Note 6)
twSP
150
180
480 ns
Start pulse setup time
tsu 20
ns
Start pulse hold time
th 20
ns
Prohibit crossing time (Note 7)
tprh 20
ns
Clock to Video output propagation delay rising
tpcor
115
ns
Clock to Video output propagation delay falling
tpcof
20
ns
Operating Temperature
Top 0
50 °C
Operating Humidity, Non--Condensing
Hop 10
60 %
2. Refer to Figure 3 for more information on AC characteristics
3. VLED directly affects illumination intensity, which directly affects VOUT.
4. Tint is the line scanning rate or integration time. Tint is determined by the interval between two start pulses. The clock is proportional to Tint.
5. Main clock frequency (f) corresponds to the video sampling frequency.
6. Min, Typ, Max specifications reflect operation at the corresponding Min, Typ, Max clock frequency.
7. Prohibit crossing time is to insure that two start pulses are not supplied in the same scan line time. SP may only be active high during one
falling edge of CP for any given scan.
http://onsemi.com
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)