Document
Datasheet
Operational Amplifiers
Low Noise Operational Amplifiers
BA4558xxx, BA4558Rxxx
●General Description
Normal BA4558 and high-reliability BA4558R integrate two independent Op-Amps on a single chip Especially, this series is suitable for any audio applications due to low noise and low distortion characteristics and are usable for other many applications by wide operating supply voltage range.BA4558R is high-reliability products with extended operating temperature range and high ESD tolerance.
●Features
High voltage gain, low noise, low distortion Wide operating supply voltage Internal ESD protection Wide operating temperature Range
●Packages
W(Typ.) x D(Typ.) x H(Max.)
MSOP8
2.90mm x 4.00mm x 0.90mm
SSOP-B8
3.00mm x 6.40mm x 1.35mm
SOP8
5.00mm x 6.20mm x 1.71mm
TSSOP-B8
3.00mm x 6.40mm x 1.20mm
SOP-J8
4.90mm x 6.00mm x 1.65mm
●Key Specification Wide Operating Supply Voltage
(split supply):±4.0V to ±15V Wide Temperature Range: BA4558: -40°C to +85°C
BA4558R: -40°C to +105°C
High Slew Rate:
1V/µs(Typ.)
Total Harmonic Distortion :
0.005%(Typ.)
Input Referred Noise Voltage :
12 nV/ Hz (Typ.)
●Selection Guide Normal
Dual
High Reliability
Dual
●Block Diagram
VCC
Maximum Operation Temperature
Slew Rate
+85°C
1V/µs
BA4558F BA4558FV BA4558FVT BA4558FVM BA4558FJ
Slew Rate 1V/µs
+105°C
BA4558RF BA4558RFV BA4558RFVT BA4558RFVM BA4558RFJ
-IN +IN
VOUT
VEE
Fig. 1 Simplified schematic
○Product structure:Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays.
www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・14・00
1/26
TSZ02201-0RAR1G200010-1-2 4.SEP.2012 Rev.003
BA4558xxx, BA4558Rxxx
Datasheet
●Pin Configuration(TOP VIEW)
OUT1 1 -IN1 2 +IN1 3 VEE 4
CH1 -+
CH2 +-
8 VCC 7 OUT2 6 -IN2 5 +IN2
SOP8
BA4558F BA4558RF
S S O P -B8
BA4558FV BA4558RFV
T SSOP-B8
BA4558FVT BA4558RFVT
M SOP8
BA4558FVM BA4558RFVM
SOP- J8
BA4558FJ BA4558RFJ
SOP8
BA4558F BA4558RF
SSOP-B8
BA4558FV BA4558RFV
Package
TSSOP-B8
BA4558FVT BA4558RFVT
MSOP8
BA4558FVM BA4558RFVM
SOP-J8
BA4558FJ BA4558RFJ
●Ordering Information
BA4 5 5 8 x x x x -
xx
Part Number BA4558xxx BA4558Rxxx
Package F: SOP8 FV: SSOP-B8 FJ: SOP-J8 FVT: TSSOP-B8 FVM: MSOP8
Packaging and forming specification E2: Embossed tape and reel
(SOP8/SSOP-B8/TSSOP-B8/SOP-J8) TR: Embossed tape and reel
(MSOP8)
●Line-up Topr
Operating Supply Voltage
(split supply)
-40°C to +85°C ±4.0V to ±15.0V
-40°C to +105°C
Supply Current (Typ.)
3mA
Slew Rate (Typ.)
1V/µs
Package
Orderable Part Number
SOP8 SSOP-B8 TSSOP-B8 MSOP8 SOP-J8J SOP8 SSOP-B8 TSSOP-B8 MSOP8 SOP-J8
Reel of 2500 Reel of 2500 Reel of 3000 Reel of 3000 Reel of 2500 Reel of 2500 Reel of 2500 Reel of 3000 Reel of 3000 Reel of 2500
BA4558F-E2 BA4558FV-E2 BA4558FVT-E2 BA4558FVM-TR BA4558FJ-E2 BA4558RF-E2 BA4558RFV-E2 BA4558RFVT-E2 BA4558RFVM-TR BA4558RFJ-E2
www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・00
2/26
TSZ02201-0RAR1G200010-1-2 4.SEP.2012 Rev.003
BA4558xxx, BA4558Rxxx
Datasheet
●Absolute Maximum Ratings (Ta=25℃) ○BA4558, BA4558R
Parameter
Symbol
BA4558
Ratings
BA4558R
Supply Voltage Power dissipation Differential Input Voltage*5
VCC-VEE SOP8
SSOP-B8 Pd TSSOP-B8
MSOP8 SOP-J8 Vid
552*1*5 500*2*5 500*2*5 470*3*5 540*4*5
VCC-VEE
+36
690*1*5 625*2*5 625*2*5 587*3*5 675*4*5
+36
Input common-mode voltage range
Vicm
VEE to VCC
(VEE-0.3) to VEE+36
Operating Supply Voltage
Vopr
+8 to +30 (±4 to ±15)
Operating Temperature
Topr
-40 to +85
-40 to +105
Storage Temperature
Tstg
-55 to +125
-55 to +150
Maximum Junction Temperature
Tjmax
+125
+150
Note: Absolute maximum rating item indicates the condition which must not be exceeded.
Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment
may cause deterioration of characteristics. *1 To use at temperature above Ta=25℃ reduce 5.52mW. *2 To use at temperature above Ta=25℃ reduce 5mW. *3 To use at temperature above Ta=25℃ reduce 4.7mW. *4 To use at temperature above Ta=25℃ reduce 5.4mW.
*5 Mounted on a FR4 glass epoxy PCB(70mm×70mm×1.6mm).
*6 The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VEE.
Unit V
mW
V V V ℃ ℃ ℃
www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・00
3/26
TSZ02201-0RAR1G200010-1-2 4.SEP.2012 Rev.003
BA4558xxx, BA4558Rxxx
Datasheet
●Electrical Characteristics ○BA4558 (Unless otherwise specified VCC=+15V, VEE=-15V)
Parameter
Symbol
Temperature Range
Min.
Limits Typ.
Max.
Unit
Condition
Input Offset Voltage *7
Vio 25℃ - 0.5 6 mV VOUT=0V
Input Offset Current *7
Iio 25℃ - 5 200 nA VOUT=0V
Input Bias Current *8
Ib
Supply Current
ICC
Maximum Output Voltage
VOM
Larg.