LED Driver
Datasheet
LED Driver with I2C Compatible and 3-wire Serial Interface for 8×16 LEDs in Dot Matrix
BU16501KS2
General De...
Description
Datasheet
LED Driver with I2C Compatible and 3-wire Serial Interface for 8×16 LEDs in Dot Matrix
BU16501KS2
General Description
BU16501KS2 is “Matrix LED Driver” that is the most suitable for Home Appliance. It can control 8x16 (128 dot) LED Matrix by internal 8-channel PMOS SWs and 16-channel LED drivers. It can control the brightness in each dot by the setting of the internal register. It supports SPI and I2C interface.
Features
LED Matrix driver (8x16) It has 8-channel PMOS SWs and 16-channel current drivers with 1/8 TDM timing driven sequentially. Put ON/OFF (for every dot) The current drivers can drive from 0 to 20.00mA current with “16” steps(for every dot) The current drivers can drive maximum 42.5mA/Line (ISET=47kΩ) 64 steps of the luminance control by PWM (common setting for all dots)
Interface SPI and I2C BUS FS mode (max 400 kHz) Compability. For I2C mode, I2C Device address is selectable (74h or 75h).
Thermal Shutdown
Key Specifications
Operating power supply voltage range: 2.7V to 5.5V
Oscillator frequency:
1.2MHz (Typ.)
Operating temperature range:
-40℃ to +85℃
Package(s)
SQFP-T52M SQFP-T52
W(Typ) x D(Typ) x H(Max)
12.00mm x 12.00mm x 1.60mm 12.00mm x 12.00mm x 1.50mm
Applications
Mobile phone, portable device, home electrical appliance, and general consumer equipment. Device provided with LED display application. LED display. Amusement, Traffic Signboards, hobby, etc.
Pin Configuration(s)
GND5 GND4 VBAT1 LED10 LED11 LED12 ...
Similar Datasheet