linearity amplifier. BGU8822 Datasheet

BGU8822 amplifier. Datasheet pdf. Equivalent

Part BGU8822
Description Dual channel low-noise high linearity amplifier
Feature BGU8822/A Dual channel low-noise high linearity amplifier with DSA and SPDT Rev. 6 — 15 April 202.
Manufacture NXP
Datasheet
Download BGU8822 Datasheet



BGU8822
BGU8822/A
Dual channel low-noise high linearity amplifier with DSA and
SPDT
Rev. 6 — 15 April 2020
Product data sheet
1 General description
The BGU8822/A, also known as the BTS5201M/A, is a highly integrated dual channel
digitally controlled low noise amplifier (LNA) with digital step attenuator (DSA) and a
single-pole double-through (SPDT) switch. The BGU8822/A supports receivers (main
and diversity) in both TDD and FDD systems. It has a first stage LNA optimized for
sensitivity, followed by a DSA and output stage amplifier. To support highly integrated
solutions and reduce platform costs a standalone SPDT switch is included.
The <keyword keyref="btn"/> is optimized for frequency band 1.4 GHz - 2.2 GHz, but
supports 2.2 GHz - 2.7 GHz as well.
The <keyword keyref="btn"/> is controlled via SPI bus, supporting both 3- and 4-wire
configurations. Additionally, in TDD systems the LNAs and DSA can also be controlled
via direct-access pins.
The <keyword keyref="btn"/> is housed in a small footprint (5 x 5 x 0.72 mm) 44-pin
leadless package.
2 Features and benefits
Dual channel (diversity and main) highly integrated LNA + DSA
Frequency bands 1.4 GHz - 2.2.GHz and 2.2 GHz - 2.7 GHz
Noise figure = 0.7 dB
High linearity: IP3O = 37 dBm
High input return loss >13 dB
High output return loss >13 dB
Unconditionally stable up to 20 GHz
Digital step attenuator with 31 dB range and 1 dB step
High linearity SPDT, Pi(1dB) = 35 dBm, IP3i = 51 dBm
Programmable via 3 wire or 4-wire SPI (Read/write)
Small 44-terminal leadless package 5 mm × 5 mm × 0.72 mm
ESD protection on all terminals
Moisture sensitivity level 3
+5 V single supply



BGU8822
NXP Semiconductors
BGU8822/A
Dual channel low-noise high linearity amplifier with DSA and SPDT
3 Applications
Wireless infrastructure
5G ready
Low noise and high linearity applications
LTE, W-CDMA, CDMA, GSM
General-purpose wireless applications
TDD or FDD systems
Suitable for small cells
4 Quick reference data
Table 1. Quick reference data BGU8822/A LNA1
f = 2200 MHz; VCC = 5 V; Tamb = 25 °C; input and output 50 Ω; unless otherwise specified. All RF parameters are measured
in an application board as shown in Figure 52 with components listed in Table 33 optimized for f = 2200 MHz.
Symbol Parameter
Conditions
Min Typ Max Unit
ICC supply current
LNA1 enable
- 54 64 mA
Gp
NF
PL(1dB)
IP3O
Disable
power gain
noise figure
output power at 1 dB gain compression
output third-order intercept point
2-tone; tone spacing = 1 MHz;
Pi = -15 dBm per tone
-
[1] 16.3
[1] -
[1] 17.9
[1] 34
3
18
0.7
19
37
-
-
-
-
-
mA
dB
dB
dBm
dBm
[1] Connector and Printed-Circuit Board (PCB) losses have been de-embedded for all RF parameters.
Table 2. Quick reference data BGU8822/A DSA+LNA2
f = 2200 MHz; VCC = 5 V; Tamb = 25 °C; input and output 50 Ω; unless otherwise specified. All RF parameters are measured
in an application board as shown in Figure 52 with components listed in Table 33 optimized for f = 2200 MHz.
Symbol Parameter
Conditions
Min Typ Max Unit
ICC supply current
Gp
NF
PL(1dB)
IP3O
power gain
noise figure
output power at 1 dB gain
compression
output third-order intercept point
LNA2 enable
Disable
2-tone; tone spacing = 1 MHz;
Pi = -15 dBm per tone
- 57
-
[1] 15.9
[1] -
[1] 17.9
5
17
2.3
20
67
-
-
-
-
mA
mA
dB
dB
dBm
[1] 34 37 -
dBm
[1] Connector and Printed-Circuit Board (PCB) losses have been de-embedded for all RF parameters.
BGU8822/A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 15 April 2020
© NXP B.V. 2020. All rights reserved.
2 / 43





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)