32-bit MCU
NXP Semiconductors Data Sheet: Technical Data
KEA128 Sub-Family Data Sheet
Supports the following: S9KEAZ64AMLK(R), S9KE...
Description
NXP Semiconductors Data Sheet: Technical Data
KEA128 Sub-Family Data Sheet
Supports the following: S9KEAZ64AMLK(R), S9KEAZ128AMLK(R), S9KEAZ64AVLK(R), S9KEAZ128AVLK(R), S9KEAZ64ACLK(R), S9KEAZ128ACLK(R), S9KEAZ64AMLH(R), S9KEAZ128AMLH(R), S9KEAZ64AVLH(R), S9KEAZ128AVLH(R), S9KEAZ64ACLH(R) and S9KEAZ128ACLH(R)
Key features
Operating characteristics – Voltage range: 2.7 to 5.5 V – Flash write voltage range: 2.7 to 5.5 V – Temperature range (ambient): -40 to 125°C
Performance – Up to 48 MHz Arm® Cortex-M0+ core – Single cycle 32-bit x 32-bit multiplier – Single cycle I/O access port
Memories and memory interfaces – Up to 128 KB flash – Up to 16 KB RAM
Clocks – Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; choice of low power or high gain oscillators – Internal clock source (ICS) - internal FLL with internal or external reference, 37.5 kHz pre-trimmed internal reference for 48 MHz system clock – Internal 1 kHz low-power oscillator (LPO)
Document Number S9KEA128P80M48SF0 Rev. 5, 09/2019
S9KEA128P80M48SF0
System peripherals – Power management module (PMC) with three power modes: Run, Wait, Stop – Low-voltage detection (LVD) with reset or interrupt, selectable trip points – Watchdog with independent clock source (WDOG) – Programmable cyclic redundancy check module (CRC) – Serial wire debug interface (SWD) – Aliased SRAM bitband region (BIT-BAND) – Bit manipulation engine (BME)
Security and integrity modules – 80-bit uniq...
Similar Datasheet