32-bit MCU
NXP Semiconductors Data Sheet: Technical Data
Document Number S9KEA64P64M20SF0 Rev. 6, 10/2019
KEA64 Sub-Family Data S...
Description
NXP Semiconductors Data Sheet: Technical Data
Document Number S9KEA64P64M20SF0 Rev. 6, 10/2019
KEA64 Sub-Family Data Sheet
Supports the following: S9KEAZN16AMLC(R), S9KEAZN32AMLC(R), S9KEAZN64AMLC(R), S9KEAZN16AMLH(R), S9KEAZN32AMLH(R), and S9KEAZN64AMLH(R)
Key features
Operating characteristics – Voltage range: 2.7 to 5.5 V – Flash write voltage range: 2.7 to 5.5 V – Temperature range (ambient): -40 to 125°C
Performance – Up to 40 MHz Arm® Cortex-M0+ core and up to 20 MHz bus clock – Single cycle 32-bit x 32-bit multiplier – Single cycle I/O access port
Memories and memory interfaces – Up to 64 KB flash – Up to 256 B EEPROM – Up to 4 KB RAM
Clocks – Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 20 MHz crystal or ceramic resonator; choice of low power or high gain oscillators – Internal clock source (ICS) - internal FLL with internal or external reference, 31.25 kHz pretrimmed internal reference for 40 MHz system and core clock. – Internal 1 kHz low-power oscillator (LPO)
S9KEA64P64M20SF0
System peripherals – Power management module (PMC) with three power modes: Run, Wait, Stop – Low-voltage detection (LVD) with reset or interrupt, selectable trip points – Watchdog with independent clock source (WDOG) – Programmable cyclic redundancy check module (CRC) – Serial wire debug interface (SWD) – Bit manipulation engine (BME)
Security and integrity modules – 64-bit unique identification (ID) number per chip
Human-machine interface – Up to 57 general-pur...
Similar Datasheet