MINIATURE RELAY. RY6D-K Datasheet

RY6D-K RELAY. Datasheet pdf. Equivalent

Part RY6D-K
Description MINIATURE RELAY
Feature FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2A (for signal switching) RY Series n FEATURES l Ultra .
Manufacture Fujitsu
Datasheet
Download RY6D-K Datasheet



RY6D-K
FTR-K1 SERIES
MINIATURE RELAY
2 POLES - 1 to 2A (for signal switching)
RY Series
n FEATURES
l Ultra high sensitivity
l UL, CSA recognized (see note 2)
l Conforms to FCC rules and regulations Part 68
- Surge strength 1,500 V
l High dielectric strength type available (RY-WF type)
l Contact arrangement MBB type available (RY-D type)
l High reliability-bifurcated contacts
l Wide operating range
l DIL terminals
l Plastic sealed type, cat III
l RoHS compliant.
Please see page 9 for more information
n PARTNUMBER INFORMATION
RY - 12 WF - K
[Example] (a) (*) (b) (c) (d)
(a) Relay type
RY
(b) Coil rated voltage
012
(c) Coil and contact type
W
WZ
WF
WFZ
D
(d) Enclosure
K
: RY-Series
: 3.....48 VDC
Coil rating table at page 3
: High sensitive type
: Nominal 0.5W type
: High dielectric strength type
: 2A type
: 2 form D (2 MMB type)
: Plastic sealed type
Note 1: Actual marking omits the hyphen (-) of (*)
For movable and stationary contact with gold overlay type, add suffix “–OH”.
Note 2: Standard relay does not bear the UL/CSA marking.
In case UL/CSA certification is necessary, add -UL to the ordering partnumber.
1



RY6D-K
FTR-K1RSYESREIREISES
n SPECIFICATION
Item
Contact
Data
Life
Coil Data
Configuration
Construction
Material
Resistance (initial)
Contact rating
Max. carrying current
Max. switching voltage
Max. switching power
Max. switching current
Min. switching load *
Capacitance (at 10MHz)
Mechanical
Electrical (at contact rating)
Rated power
High sensitive
type
500 mW type
RY-( )W-K
RY-( )WZ-K
2 form C (DPDT)
Bifurcated (cross bar)
High dielectric
strength
RY-( )WF-K
Gold overlay silver-palladium
Max. 100 mΩ at 6 VDC, 1A
1A, 24VDC
0.5A, 120VAC
1.25A
1A, 24VDC
0.25A,120VAC
120VAC, 60VDC
60VA / 24W
1A
30VA / 24W
2 A type
RY-( )WFZ-K
Gold overlay
silver-nickel
2A, 30VDC
0.5A,125VAC
2A
125VAC,
150VDC
62.5VA /60W
0.01 mA, 10 mVDC
Approximately 0.9 pF (open contacts), 1.4pF (adjacent contacts)
Approximately 1.9 pF (between coil and contacts)
Min. 20 x 106
operations
Min. 10 x 106 operations
Min. 200 x 103 operations (0.5A,
120VAC)
Min. 500 x 103 operations
(1A, 24VDC)
Min. 500x103
operations
(0.25A,
120VAC)
(1A, 4VDC)
Min. 100x103
operations
(2A, 30VDC)
150 - 300mW 500 - 580mW 450 - 460mW 500 - 580mW
Continous
(MBB)type
RY-( )D-K
2 form D (2 MBB)
Single
Gold overlay silver-
palladium
0.15A, 48VDC
0.3A, 120VAC
0.6A
120VAC, 60VDC
36VA / 7.2W
0.1 mA,
10 mVDC
Min. 1 x 106
operations
Min.200x103 ops.
(0.3A, 120VAC)
Min.500x103 ops.
(0.15A, 48VDC)
450 - 480mW
Operate power
75 -140mW
125 - 145mW 200 - 210mW 200 - 324mW 200 - 210mW
Operating temperature range (no
frost)
-30 °C to
+90 °C (+80 °C
for 48VDC type)
-30 °C to +60 °C
-30 °C to +70 °C
(+65 °C for 48VDC
type)
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)