DatasheetsPDF.com

Numeric Display. SA56-11SRWA Datasheet

DatasheetsPDF.com

Numeric Display. SA56-11SRWA Datasheet






SA56-11SRWA Display. Datasheet pdf. Equivalent




SA56-11SRWA Display. Datasheet pdf. Equivalent





Part

SA56-11SRWA

Description

Single Digit Numeric Display



Feature


SA56-11SRWA 14.22 mm (0.56 inch) Single Digit Numeric Display DESCRIPTIONS The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wr ist band or anti-electrostatic glove wh en handling the LEDs All devices, equip ments and machiner.
Manufacture

Kingbright

Datasheet
Download SA56-11SRWA Datasheet


Kingbright SA56-11SRWA

SA56-11SRWA; ies must be electrically grounded FEATUR ES 0.56 inch digit height Low current o peration Excellent character appearance Easy mounting on P.C. boards or socket s Mechanically rugged Standard: gray fa ce, white segment RoHS compliant APPLIC ATIONS Home and smart appliances Displa y time and digital combination Industri al and instrumental applications Numeri c status ATTENTION.


Kingbright SA56-11SRWA

Observe precautions for handling electr ostatic discharge sensitive devices PA CKAGE DIMENSIONS Notes: 1. All dimensio ns are in millimeters (inches), Toleran ce is ±0.25(0.01")unless otherwise not ed. 2. The specifications, characterist ics and technical data described in the datasheet are subject to change withou t prior notice. SELECTION GUIDE Part N umber Emitting Col.


Kingbright SA56-11SRWA

or (Material) Lens Type SA56-11SRWA Super Bright Red (GaAlAs) White Dif fused Notes: 1. Luminous intensity / l uminous Flux: +/-15%. * Luminous intens ity value is traceable to CIE127-2007 s tandards. © 2020 Kingbright. All Right s Reserved. Spec No: DSAP8375 / 1301000 571 Rev No: V.1A Date: 03/10/2020 Iv ( ucd) @ 10mA [1] Min. Typ. 14000 340 00 *5600 *10000 De.

Part

SA56-11SRWA

Description

Single Digit Numeric Display



Feature


SA56-11SRWA 14.22 mm (0.56 inch) Single Digit Numeric Display DESCRIPTIONS The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wr ist band or anti-electrostatic glove wh en handling the LEDs All devices, equip ments and machiner.
Manufacture

Kingbright

Datasheet
Download SA56-11SRWA Datasheet




 SA56-11SRWA
SA56-11SRWA
14.22 mm (0.56 inch) Single Digit Numeric Display
DESCRIPTIONS
The Super Bright Red source color devices are made
with Gallium Aluminum Arsenide Red Light Emitting
Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
0.56 inch digit height
Low current operation
Excellent character appearance
Easy mounting on P.C. boards or sockets
Mechanically rugged
Standard: gray face, white segment
RoHS compliant
APPLICATIONS
Home and smart appliances
Display time and digital combination
Industrial and instrumental applications
Numeric status
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
SA56-11SRWA
Super Bright Red
(GaAlAs)
White Diffused
Notes:
1. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2020 Kingbright. All Rights Reserved. Spec No: DSAP8375 / 1301000571 Rev No: V.1A Date: 03/10/2020
Iv (ucd) @ 10mA [1]
Min.
Typ.
14000
34000
*5600
*10000
Description
Common Anode,
Rt. Hand Decimal
Page 1 / 4




 SA56-11SRWA
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 10mA
Dominant Wavelength IF = 10mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 10mA
Capacitance
λpeak
λdom [1]
∆λ
C
Super Bright Red
Super Bright Red
Super Bright Red
Super Bright Red
Forward Voltage IF = 10mA
VF [2]
Super Bright Red
Reverse Current (VR = 5V)
IR Super Bright Red
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
SA56-11SRWA
Value
Typ. Max.
655 -
640 -
20 -
45 -
1.8 2.3
- 10
Unit
nm
nm
nm
pF
V
µA
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Power Dissipation
PD 75
Reverse Voltage
VR 5
Junction Temperature
Tj
115
Operating Temperature
Top -40 to +85
Storage Temperature
Tstg -40 to +85
DC Forward Current
Peak Forward Current
IF
IFM [1]
30
155
Electrostatic Discharge Threshold (HBM)
-
3000
Lead Solder Temperature [2]
260°C For 3-5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2020 Kingbright. All Rights Reserved. Spec No: DSAP8375 / 1301000571 Rev No: V.1A Date: 03/10/2020
Unit
mW
V
°C
°C
°C
mA
mA
V
Page 2 / 4




 SA56-11SRWA
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
100%
80%
Ta = 25 °C
Red
60%
40%
20%
0%
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
SA56-11SRWA
Forward Current vs.
Forward Voltage
20
Ta = 25 °C
16
12
8
4
0
1.3 1.5 1.7 1.9 2.1 2.3
Forward voltage (V)
SUPER BRIGHT RED
Luminous Intensity vs.
Forward Current
2.5
Ta = 25 °C
2.0
Forward Current Derating Curve
50
40
1.5 30
1.0 20
0.5 10
0.0
0
4 8 12 16
Forward current (mA)
20
0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous Intensity vs.
Ambient Temperature
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
RECOMMENDED WAVE SOLDERING PROFILE
Notes:
1. Recommend pre-heat temperature of 105°C or less (as measured with a thermocouple
attached to the LED pins) prior to immersion in the solder wave with a maximum solder bath
temperature of 260°C
2. Peak wave soldering temperature between 245°C ~ 255°Cfor 3 sec (5 sec max).
3. Do not apply stress to the epoxy resin while the temperature is above 85°C.
4. Fixtures should not incur stress on the component when mounting and during soldering process.
5. SAC 305 solder alloy is recommended.
6. No more than one wave soldering pass.
7. During wave soldering, the PCB top-surface temperature should be kept below 105°C.
Soldering General Notes
1. Through-hole displays are incompatible with reflow soldering.
2. If components will undergo multiple soldering processes,
or other processes where the components may be subjected
to intense heat, please check with Kingbright for compatibility.
CLEANING
1. Mild "no-clean" fluxes are recommended for use in soldering.
2. If cleaning is required, Kingbright recommends to wash
components with water only. Do not use harsh organic
solvents for cleaning because they may damage the plastic
parts .
3. The cleaning process should take place at room temperature
and the devices should not be washed for more than one
minute.
4. When water is used in the cleaning process, Immediately
remove excess moisture from the component with forced-air
drying afterwards.
© 2020 Kingbright. All Rights Reserved. Spec No: DSAP8375 / 1301000571 Rev No: V.1A Date: 03/10/2020
Page 3 / 4



Recommended third-party SA56-11SRWA Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)