LED Lamp. APFA3010LSEEZGKQBKC Datasheet

APFA3010LSEEZGKQBKC Lamp. Datasheet pdf. Equivalent

Part APFA3010LSEEZGKQBKC
Description Right Angle SMD Chip LED Lamp
Feature APFA3010LSEEZGKQBKC 3.0 x 1.0 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS The Hyper Red source co.
Manufacture Kingbright
Datasheet
Download APFA3010LSEEZGKQBKC Datasheet



APFA3010LSEEZGKQBKC
APFA3010LSEEZGKQBKC
3.0 x 1.0 mm Right Angle SMD Chip LED Lamp
DESCRIPTIONS
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode
The Blue source color devices are made with InGaN
Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
3.0 x 1.5 x 1.0 mm right angle SMD LED, 1.0 mm thickness
Low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
Tinned pads for improved solderability
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
SELECTION GUIDE
Part Number
APFA3010LSEEZGKQBKC
Emitting Color
(Material)
Hyper Red
(AlGaInP)
Green (InGaN)
PACKAGE DIMENSIONS
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Lens Type
Water Clear
Iv (mcd) @ 2mA [2]
Min.
Typ.
6 15
20 60
Viewing Angle [1]
2θ1/2
150°
Blue (InGaN)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAO4451 / 1203015139 Rev No: V.6B Date: 04/10/2019
4 10
Page 1 / 4



APFA3010LSEEZGKQBKC
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 2mA
λpeak
Hyper Red
Green
Blue
Dominant Wavelength IF = 2mA
λdom [1]
Hyper Red
Green
Blue
Spectral Bandwidth at 50% Φ REL MAX
IF = 2mA
Δλ
Hyper Red
Green
Blue
Capacitance
Hyper Red
C Green
Blue
Forward Voltage IF = 2mA
VF [2]
Hyper Red
Green
Blue
Reverse Current (VR = 5V)
Hyper Red
IR Green
Blue
Temperature Coefficient of λpeak
IF = 2mA, -10°C T 85°C
TCλpeak
Hyper Red
Green
Blue
Temperature Coefficient of λdom
IF = 2mA, -10°C T 85°C
TCλdom
Hyper Red
Green
Blue
Temperature Coefficient of VF
IF = 2mA, -10°C T 85°C
Hyper Red
TCV Green
Blue
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
APFA3010LSEEZGKQBKC
Value
Typ. Max.
630
515 -
460
621
525 -
465
20
35 -
25
25
45 -
100
1.8 2.1
2.65 3.1
2.65 3.1
10
- 50
50
0.13
0.05 -
0.04
0.06
0.03 -
0.03
-1.9
-3 -
-3
Unit
nm
nm
nm
pF
V
µA
nm/°C
nm/°C
mV/°C
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Power Dissipation
Reverse Voltage
Junction Temperature
Operating Temperature
Storage Temperature
DC Forward Current
Peak Forward Current
Electrostatic Discharge Threshold (HBM)
PD
VR
Tj
Top
Tstg
IF
IFM [1]
-
Hyper Red
75
5
115
30
195
3000
Value
Green
102.5
5
115
-40 to +85
-40 to +85
25
150
450
Blue
120
5
115
30
150
250
Thermal Resistance (Junction / Ambient)
Rth JA [2]
405
650
620
Thermal Resistance (Junction / Solder point)
Rth JS [2]
275
560
535
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm2 per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAO4451 / 1203015139 Rev No: V.6B Date: 04/10/2019
Unit
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
Page 2 / 4





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)