LED LAMP. WP154A4SUREQBFZGKC Datasheet

WP154A4SUREQBFZGKC LAMP. Datasheet pdf. Equivalent

Part WP154A4SUREQBFZGKC
Description FULL COLOR LED LAMP
Feature ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z Unif.
Manufacture Kingbright
Datasheet
Download WP154A4SUREQBFZGKC Datasheet



WP154A4SUREQBFZGKC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z Uniform light output.
z Low power consumption.
z Long life-solid state reliability.
z RoHS compliant.
Package Dimensions
T-1 3/4 (5mm) FULL COLOR LED LAMP
Part Number: WP154A4SUREQBFZGKC
Hyper Red
Blue
Green
Descriptions
z The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAO1024
APPROVED: WYNEC
REV NO: V.1A
CHECKED: Allen Liu
DATE: JAN/09/2015
DRAWN: L.Q.Xie
PAGE: 1 OF 8
ERP: 1101033419



WP154A4SUREQBFZGKC
Selection Guide
Part No.
Dice
Lens Type
Iv (mcd) [2]
@ 20mA
Min. Typ.
Viewing
Angle [1]
2θ1/2
Hyper Red (AlGaInP)
650
*200
1300
*400
WP154A4SUREQBFZGKC
Blue (InGaN)
Water Clear
400
*400
900
*900
50°
Green (InGaN)
900
*900
1600
*1600
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Hyper Red
Blue
Green
645
460
515
nm IF=20mA
λD [1]
Dominant Wavelength
Hyper Red
Blue
Green
630
465
525
nm IF=20mA
Δλ1/2
Spectral Line Half-width
Hyper Red
Blue
Green
25
25
35
nm IF=20mA
C Capacitance
Hyper Red
Blue
Green
45
100
45
pF VF=0V;f=1MHz
VF [2]
Forward Voltage
Hyper Red
Blue
Green
1.9 2.5
3.3 4
3.3 4.1
V
IF=20mA
IR Reverse Current
Hyper Red
Blue
Green
10
50 uA
50
VR=5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Power dissipation
75
DC Forward Current
30
Peak Forward Current [1]
200
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Blue
120
30
150
5
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Green
102.5
25
150
Units
mW
mA
mA
V
SPEC NO: DSAO1024
APPROVED: WYNEC
REV NO: V.1A
CHECKED: Allen Liu
DATE: JAN/09/2015
DRAWN: L.Q.Xie
PAGE: 2 OF 8
ERP: 1101033419





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)