LED Lamp. APFA2507LQBDSEEZGKC Datasheet

APFA2507LQBDSEEZGKC Lamp. Datasheet pdf. Equivalent

Part APFA2507LQBDSEEZGKC
Description Right Angle SMD Chip LED Lamp
Feature APFA2507LQBDSEEZGKC 2.5 x 0.7 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS The Blue source color d.
Manufacture Kingbright
Total Page 4 Pages
Datasheet
Download APFA2507LQBDSEEZGKC Datasheet



APFA2507LQBDSEEZGKC
APFA2507LQBDSEEZGKC
2.5 x 0.7 mm Right Angle SMD Chip LED Lamp
DESCRIPTIONS
The Blue source color devices are made with InGaN
Light Emitting Diode
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
2.5 x 1.0 x 0.7 mm right angle SMD LED, 0.7 mm
thickness
Low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 3000 pcs / reel
Moisture sensitivity level: 3
Tinned pads for improved solderability
RoHS compliant
PACKAGE DIMENSIONS
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
APFA2507LQBDSEEZGKC
Emitting Color
(Material)
Blue (InGaN)
Hyper Red (AlGaInP)
Green (InGaN)
Lens Type
Water Clear
Iv (mcd) @ 2mA [2]
Min.
Typ.
4 10
6 10
20 60
Viewing Angle [1]
2θ1/2
130°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAO5250 / 1203015217 Rev No: V.4B Date: 10/24/2019
Page 1 / 4



APFA2507LQBDSEEZGKC
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 2mA
Dominant Wavelength IF = 2mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 2mA
Capacitance
Forward Voltage IF = 2mA
Reverse Current (VR = 5V)
Temperature Coefficient of λpeak
IF = 2mA, -10°C T 85°C
Temperature Coefficient of λdom
IF = 2mA, -10°C T 85°C
Temperature Coefficient of VF
IF = 2mA, -10°C T 85°C
λpeak
λdom [1]
Δλ
C
VF [2]
IR
TCλpeak
TCλdom
TCV
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
APFA2507LQBDSEEZGKC
Value
Typ. Max.
460
630 -
515
465
621 -
525
25
20 -
35
100
25 -
45
2.65 3.1
1.8 2.1
2.65 3.1
50
- 10
50
0.04
0.13 -
0.05
0.03
0.06 -
0.03
-3.0
-1.9 -
-3.0
Unit
nm
nm
nm
pF
V
µA
nm/°C
nm/°C
mV/°C
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Blue
Value
Hyper Red
Green
Power Dissipation
Reverse Voltage
Junction Temperature
Operating Temperature
Storage Temperature
DC Forward Current
Peak Forward Current
Electrostatic Discharge Threshold (HBM)
PD
VR
Tj
Top
Tstg
IF
IFM [1]
-
120 75 102.5
5 55
115 115 115
-40 to +85
-40 to +85
30 30 25
150 195 150
250 3000 450
Thermal Resistance (Junction / Ambient)
Rth JA [2]
480
670
560
Thermal Resistance (Junction / Solder point)
Rth JS [2]
460
570
440
Notes:
1. 1/10 Duty Cycle , 0.1ms Pulse Width .
2. Rth JA, Rth JS Results from mounting on PC board FR4 (pad size16 mm2 per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAO5250 / 1203015217 Rev No: V.4B Date: 10/24/2019
Unit
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
Page 2 / 4





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)