LED Lamp. APTB1612SURKQWDF Datasheet

APTB1612SURKQWDF Lamp. Datasheet pdf. Equivalent

Part APTB1612SURKQWDF
Description Bi-Color SMD Chip LED Lamp
Feature APTB1612SURKQWDF 1.6 x 1.25 mm Bi-Color SMD Chip LED Lamp DESCRIPTIONS The Hyper Red source color de.
Manufacture Kingbright
Datasheet
Download APTB1612SURKQWDF Datasheet



APTB1612SURKQWDF
APTB1612SURKQWDF
1.6 x 1.25 mm Bi-Color SMD Chip LED Lamp
DESCRIPTIONS
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
The source color devices are made with InGaN
Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
1.6 mm x 1.25 mm SMD LED, 0.65 mm thickness
Bi-color, low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
Red
White
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
APTB1612SURKQWDF
Hyper Red (AlGaInP)
White (InGaN)
Yellow Fluorescent
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAL1006 / 1203008490 Rev No: V.7A Date: 01/23/2018
Iv (mcd) @ 20mA [2]
Min.
Typ.
120 200
*40 *80
120 250
*120
*250
Viewing Angle [1]
2θ1/2
160°
Page 1 / 5



APTB1612SURKQWDF
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C (RED)
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 20mA
Dominant Wavelength IF = 20mA
Spectral Bandwidth at 50% Φ REL MAX
λpeak
λdom [1]
Δλ
Hyper Red
Hyper Red
Hyper Red
Capacitance
C Hyper Red
Forward Voltage IF = 20mA
VF [2]
Hyper Red
Reverse Current (VR = 5V)
IR Hyper Red
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
APTB1612SURKQWDF
Value
Typ. Max.
645 -
630 -
28 -
35 -
1.95 2.5
- 10
Unit
nm
nm
nm
pF
V
uA
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C (WHITE)
Parameter
Symbol
Emitting Color
Chromaticity Coordinates x
IF = 20mA
Chromaticity Coordinates y
IF = 20mA
Capacitance
x [1] White
y [1] White
C White
Forward Voltage IF = 20mA
VF [2]
White
Reverse Current (VR = 5V)
IR White
Notes:
1. Measurement tolerance of the chromaticity coordinates is ±0.01.
2. Forward voltage: ±0.1V.
3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Value
Typ.
Max.
0.31 -
0.31 -
100 -
3.3 4.0
- 50
Unit
-
-
pF
V
uA
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Hyper Red
Value
White
Power Dissipation
Reverse Voltage
Junction Temperature
Operating Temperature
Storage Temperature
DC Forward Current
Peak Forward Current
PD
VR
TJ
Top
Tstg
IF
IFM [1]
75
5
115
-40 To +85
-40 To +85
30
185
120
5
115
30
150
Electrostatic Discharge Threshold (HBM)
-
3000
250
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAL1006 / 1203008490 Rev No: V.7A Date: 01/23/2018
Unit
mW
V
°C
°C
°C
mA
mA
V
Page 2 / 5





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)