CMOS Operational Amplifier
www.ti.com
SBOS981J – OCTOBER 2019OO– PPREAAV66IS00E77D,, OOAPPPRAAIL222660002771
SBOS981J – OCTOBER 2019 – REVISED APR...
Description
www.ti.com
SBOS981J – OCTOBER 2019OO– PPREAAV66IS00E77D,, OOAPPPRAAIL222660002771
SBOS981J – OCTOBER 2019 – REVISED APRIL 2021
OPAx607 50-MHz, Low-Power, Rail-to-Rail Output CMOS Operational Amplifier for
Cost Sensitive Systems
1 Features
Gain Bandwidth Product (GBW): 50 MHz Quiescent Current: 900 µA (Typical) Broadband Noise: 3.8 nV/√Hz Input Offset Drift: 1.5 μV/°C (Maximum) Offset Voltage: 120 µV (Typical) Input Bias Current: 10 pA (Maximum) Rail-to-Rail Output (RRO) Decompensated, Gain ≥ 6 V/V (Stable) Power Down Current: 1 µA (Maximum) Supply Range: 2.2 V to 5.5 V
2 Applications
Current-Sensing Fish Finders and Sonar Ultrasonic Flow Meters Garden and Power Tools Printers Light Curtains and Safety Guards Optical Modules Handheld Test Equipment PM2.5 and PM10 Particle Sensors
RSH
LOAD
RG ISH
RG
RF
VS+
± OPA607 +
VTH
REXT
CEXT
Short Circuit Detection
± TLV3201
+ VS+
ADS7042
3 Description
The OPA607 and OPA2607 devices are decompensated, minimum gain of 6 V/V stable, general-purpose CMOS operational amplifier with low noise of 3.8 nV/√ Hz and a GBW of 50 MHz. The low noise and wide bandwidth of the OPAx607 devices make them attractive for general-purpose applications which require a good balance between cost and performance. The high-impedance CMOS inputs make the OPAx607 devices an ideal amplifier to interface with sensors with high output impedance (for example, piezoelectric transducers).
The OPAx607 devices feature a Po...
Similar Datasheet