DUAL-PORT STATIC RAM
HIGH-SPEED 3.3V 16K x 16 DUAL-PORT STATIC RAM
70V26S/L
Features
◆ True Dual-Ported memory cells which allow simultaneo...
Description
HIGH-SPEED 3.3V 16K x 16 DUAL-PORT STATIC RAM
70V26S/L
Features
◆ True Dual-Ported memory cells which allow simultaneous reads of the same memory location
◆ High-speed access – Commercial: 25/35/55ns (max.)
◆ Low-power operation – IDT70V26S Active: 300mW (typ.) Standby: 3.3mW (typ.) – IDT70V26L Active: 300mW (typ.) Standby: 660μW (typ.)
◆ Separate upper-byte and lower-byte control for multiplexed bus compatibility
◆ IDT70V26 easily expands data bus width to 32 bits or more using the Master/Slave select when cascading more than one device
◆ M/S = VIH for BUSY output flag on Master M/S = VIL for BUSY input on Slave
◆ On-chip port arbitration logic ◆ Full on-chip hardware support of semaphore signaling
between ports ◆ Fully asynchronous operation from either port ◆ TTL-compatible, single 3.3V (±0.3V) power supply ◆ Available in 84-pin PGA and PLCC ◆ Green parts available, see ordering information
Functional Block Diagram
R/WL UBL
R/WR UBR
LBL
CEL OEL
I/O8L-I/O15L
I/O0L-I/O7L BUSYL(1,2)
A13L A0L
I/O Control
I/O Control
Address Decoder
14
CEL
MEMORY ARRAY
ARBITRATION SEMAPHORE
LOGIC
Address Decoder
14
CER
SEML
NOTES: 1. (MASTER): BUSY is output; (SLAVE): BUSY is input. 2. BUSY outputs are non-tri-stated push-pull.
M/S
©2019 Integrated Device Technology, Inc.
1
LBR CER OER
I/O8R-I/O15R I/O0R-I/O7R BUSYR(1,2) A13R A0R
SEMR
2945 drw 01
JULY 2019
DSC 2945/19
70V26S/L High-Speed 16K x 16 Dual-Port Static RAM
Description
The IDT70V26 is a high-speed 16K x 16 Dual-Por...
Similar Datasheet