SMT Power Inductors
SMT Power Inductors
High Current Composite Inductor - PA5005.XXXNLT and PM2205.XXXNLT
Height: 5.0mm Max Footprint: 6.8m...
Description
SMT Power Inductors
High Current Composite Inductor - PA5005.XXXNLT and PM2205.XXXNLT
Height: 5.0mm Max Footprint: 6.8mm x 6.6mm Max Current Rating: up to 24Apk Inductance Range: 0.82uH to 8.2uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise Available in Commercial (PA5005) and Automotive (PM2205) grades
Electrical Specifications @ 25°C, Operating Temperature Range per Below4
Part Number
Commerical
Automotive6
Inductance 100KHz, 0.1V
Rated3 Current
DC Resistance TYP. MAX.
Saturation2 Current (25°C)
(-40°C to 125°C) (-55°C to 155°C) uH±20% A mΩ mΩ
PA5005.821NLT PM2205.821NLT
0.82
21 3.8 4.18
PA5005.102NLT PM2205.102NLT
1
20 4.1 4.52
PA5005.122NLT PM2205.122NLT
1.2
18 5.3 5.83
PA5005.152NLT PM2205.152NLT
1.5
17 5.7 6.3
PA5005.182NLT PM2205.182NLT
1.8
16 6.4 7.1
PA5005.222NLT PM2205.222NLT
2.2
13 7.7 8.5
PA5005.332NLT PM2205.332NLT
3.3
11 11.2 12.5
PA5005.432NLT PM2205.432NLT
4.3
9 15.1 16.2
PA5005.472NLT PM2205.472NLT
4.7
8.5 16.7 18.4
A
24 23 22 19.5 18.5 16 12.5 11 10.5
K Factor for
Core Loss
132.2 132.2 109.2 93 93 81 64.4 53.4 49.2
Mechanical D
±0.3 5.3 5.3 5.3 5.3 5.3 5.2 5.2 5.2 5.2
Notes:
1. Actual temperature of the component during system operation (ambient plus
4. The part temperature (ambient+temp rise) should not exceed 125�C under worst
temperature rise) must be within the standard operating range.
case operating conditions. Circuit design, PCB trac...
Similar Datasheet