Buck PWM Switcher
SMT Power Inductor
High Current Molded Power Inductor - PA4547.XXXNLT Series
Height: 1.5mm Max Footprint: 3.8mm x 3.7mm...
Description
SMT Power Inductor
High Current Molded Power Inductor - PA4547.XXXNLT Series
Height: 1.5mm Max Footprint: 3.8mm x 3.7mm Max Current Rating: up to 5.5A Inductance Range: 0.47uH to 10.0uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise
Part Number
PA4547.471NLT PA4547.561NLT PA4547.681NLT PA4547.102NLT PA4547.152NLT PA4547.222NLT PA4547.332NLT PA4547.472NLT PA4547.562NLT PA4547.682NLT PA4547.822NLT PA4547.103NLT
Inductance 100KHz, 1.0V
uH±20% 0.47 0.56 0.68 1.00 1.50 2.20 3.30 4.70 5.60 6.80 8.20 10.00
Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C
Rated Current
DC Resistance
MAX.
A mΩ
5.50 28
5.00 33
4.50 42
3.60 50
3.40 77
3.20 98
2.50 205
1.90 264
1.70 318
1.50 348
1.30 468
1.20 522
TYP. mΩ 23.3 28 34 41 64 82 170 220 265 290 390 435
Saturation Current
A 8.0 7.2 6.5 5.8 4.0 3.8 3.2 2.8 2.3 2.0 1.8 1.6
1
power.pulseelectronics.com
P824. C (11/17)
http://www.power.pulseelectronics.com/contact
SMT Power Inductor
High Current Molded Power Inductor - PA4547.XXXNLT Series
Notes:
1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range.
2. The saturation current is the current at which the initial inductance drops approximately 30% at the stated ambient temperature. This current is determined by placing the compnent in the specified ambient environment and applying a short durat...
Similar Datasheet