DatasheetsPDF.com

PM4342.152NLT Dataheets PDF



Part Number PM4342.152NLT
Manufacturers Pulse
Logo Pulse
Description SMT Power Inductors
Datasheet PM4342.152NLT DatasheetPM4342.152NLT Datasheet (PDF)

SMT Power Inductors High Current Molded Power Inductor - PA4342.XXXNLT & PM4342.XXXNLT Series Commercial6,7 PA4342.151NLT PA4342.221NLT PA4342.271NLT PA4342.331NLT PA4342.361NLT PA4342.391NLT PA4342.451NLT PA4342.471NLT PA4342.561NLT PA4342.681NLT PA4342.881NLT PA4342.102NLT PA4342.122NLT PA4342.152NLT PA4342.222NLT PA4342.252NLT PA4342.332NLT PA4342.402NLT PA4342.472NLT PA4342.562NLT PA4342.682NLT Automotive6,7 PM4342.151NLT PM4342.221NLT PM4342.271NLT PM4342.331NLT PM4342.361NLT PM4342.391NL.

  PM4342.152NLT   PM4342.152NLT


Document
SMT Power Inductors High Current Molded Power Inductor - PA4342.XXXNLT & PM4342.XXXNLT Series Commercial6,7 PA4342.151NLT PA4342.221NLT PA4342.271NLT PA4342.331NLT PA4342.361NLT PA4342.391NLT PA4342.451NLT PA4342.471NLT PA4342.561NLT PA4342.681NLT PA4342.881NLT PA4342.102NLT PA4342.122NLT PA4342.152NLT PA4342.222NLT PA4342.252NLT PA4342.332NLT PA4342.402NLT PA4342.472NLT PA4342.562NLT PA4342.682NLT Automotive6,7 PM4342.151NLT PM4342.221NLT PM4342.271NLT PM4342.331NLT PM4342.361NLT PM4342.391NLT PM4342.451NLT PM4342.471NLT PM4342.561NLT PM4342.681NLT PM4342.881NLT PM4342.102NLT PM4342.122NLT PM4342.152NLT PM4342.222NLT PM4342.252NLT PM4342.332NLT PM4342.402NLT PM4342.472NLT PM4342.562NLT PM4342.682NLT Height: 4.0mm Max Footprint: 11.5mm x 10.3mm Max Current Rating: up to 43.0A Inductance Range: 0.15uH to 68.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux 200Vdc Isolation between terminal and core Available in Commercial (PA) and Automotive (PM) grades Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C Inductance5 Rated DC Resistance 100KHz, 1V Current TYP. MAX. uH A mΩ mΩ 0.15* 43 0.5 0.6 0.22 35 0.8 1.0 0.27 33 0.82 1.0 0.33 31 1.0 1.2 0.36 31 1.05 1.2 0.39 30 1.1 1.3 0.45 29 1.3 1.5 0.47 28 1.3 1.5 0.56 25 1.6 1.8 0.68 22 2.4 2.7 0.88 20 2.5 2.9 1.00 18 3.0 3.3 1.20 17 3.3 3.8 1.50 16 4.0 4.6 2.20 12 6.5 7.0 2.50 11.5 7.9 8.7 3.30 11 10.8 11.8 4.00 10.2 13 15 4.70 10 15 15.5 5.60 9.0 17 19.3 6.80 8.5 17.5 23.3 Saturation Current A 75 60 60 60 60 60 45 43 40 39 38 36 33 33 27 23 20 18 17 14 13.5 1 power.pulseelectronics.com P769. L (06/19) http://www.power.pulseelectronics.com/contact SMT Power Inductors High Current Molded Power Inductor - PA4342.XXXNLT & PM4342.XXXNLT Series Commercial6,7 PA4342.822NLT PA4342.103NLT PA4342.153NLT PA4342.223NLT PA4342.273NLT PA4342.333NLT PA4342.473NLT PA4342.683NLT Automotive6,7 PM4342.822NLT PM4342.103NLT PM4342.153NLT PM4342.223NLT PM4342.273NLT PM4342.333NLT PM4342.473NLT PM4342.683NLT Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C Inductance5 100KHz, 1V Rated Current DC Resistance TYP. MAX. uH A mΩ mΩ 8.2 8.0 20 25.5 10 7.5 27 30 15 6.25 40 45 22 5.0 64 74 27 4.0 86 100 33 3.5 92 112 47 3.0 145 167 68 2.0 205 240 Saturation Current A 12.5 12 10 7.0 6.0 5.0 4.5 3.0 Notes: 1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range. 2. The saturation current is the current at which the initial inductance drops approximately 30% at the stated ambient temperature. This current is determined by placing the compnent in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effect) to the component. 3. The rated current is the DC current required to raise the component temperature by approximately 40�C. Take note that the components’ performance varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 4. The part temperature (ambient+temp rise) should not exceed 125�C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 5. Please note that the inductance tolerance of all parts are ±20%, except .151NLT which is ±30%. 6. Parts shown in bold are standard catalog parts and are available through sample stock and distribution. Parts in lighter font are available but are not necessarily held in sample stock or distribution and lead times may be longer. Please contact Pulse for availablity. 7. The PM prefix parts are AEC-Q200 qualified and has full automotive IATF16949 certification. The mechanical dimensions are 100% tested in production but do not necessarily meet a product capability index (Cpk) 1.33 and therefore may not strictly conform to PPAP. 8. Special Characteistic PA4342/PM4342 Mechanical Final Layout SUGGESTED PAD LAYOUT Series A B C D E F G H PA4342/PM4342 11.5 Max 10.3 Max 4.0 Max (3.0) (6.4) (3.5) (4.1) (5.4) All Dimensions in mm. 2 power.pulseelectronics.com P769. L (06/19) http://www.power.pulseelectronics.com/contact SMT Power Inductors High Current Molded Power Inductor - PA4342.XXXNLT & PM4342.XXXNLT Series TAPE & REEL INFO Marking Marking WA K0 P1 Direction of tape PA4342/PM4342 SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) A G P1 W K0 Ø330 24 16 24 4.5 QTY PCS/REEL 500 G For More Information Pulse Worldwide Headquarters Pulse Europe 15255 Innovation Drive Ste 100 Pulse Electronics GmbH San Diego, CA 92128 Am Rottland 12 U.S.A. 58540 Meinerzhagen Germany Pulse China.


PM4342.122NLT PM4342.152NLT PM4342.222NLT


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)