DatasheetsPDF.com

PM4345.562NLT Dataheets PDF



Part Number PM4345.562NLT
Manufacturers Pulse
Logo Pulse
Description SMT Power Inductors
Datasheet PM4345.562NLT DatasheetPM4345.562NLT Datasheet (PDF)

SMT Power Inductors High Current Molded Power Inductor - PA4345.XXXNLT & PM4345.XXXNLT Series Height: 2.0mm Max Footprint: 6.0mm x 5.4mm Max Current Rating: up to 18.0A Inductance Range: 0.1uH to 22uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux 200Vdc Isolation between terminal and core Available in Commercial (PA) and Automotive (PM) grades Commercial6,7 Automotive6,7 PA4345.101NLT PA4345.151NLT PA434.

  PM4345.562NLT   PM4345.562NLT


Document
SMT Power Inductors High Current Molded Power Inductor - PA4345.XXXNLT & PM4345.XXXNLT Series Height: 2.0mm Max Footprint: 6.0mm x 5.4mm Max Current Rating: up to 18.0A Inductance Range: 0.1uH to 22uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux 200Vdc Isolation between terminal and core Available in Commercial (PA) and Automotive (PM) grades Commercial6,7 Automotive6,7 PA4345.101NLT PA4345.151NLT PA4345.221NLT PA4345.241NLT PA4345.331NLT PA4345.471NLT PA4345.561NLT PA4345.681NLT PA4345.102NLT PA4345.122NLT PA4345.152NLT PA4345.222NLT PA4345.332NLT PA4345.472NLT PA4345.562NLT PA4345.682NLT PA4345.822NLT PA4345.103NLT PA4345.153NLT PA4345.223NLT PM4345.101NLT PM4345.151NLT PM4345.221NLT PM4345.241NLT PM4345.331NLT PM4345.471NLT PM4345.561NLT PM4345.681NLT PM4345.102NLT PM4345.122NLT PM4345.152NLT PM4345.222NLT PM4345.332NLT PM4345.472NLT PM4345.562NLT PM4345.682NLT PM4345.822NLT PM4345.103NLT PM4345.153NLT PM4345.223NLT Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C Inductance5 100KHz, 1V Rated Current DC Resistance TYP. MAX. uH±20% A mΩ mΩ 0.10* 18.0 3.6 4.0 0.15* 16.0 3.8 4.6 0.22 15.0 4.0 5.5 0.24 13.0 6.0 7.0 0.33 12.0 6.3 7.3 0.47 11.5 7.3 8.6 0.56 10.7 9.3 11.2 0.68 10.0 11.0 12.4 1.0 7.0 17.5 20.0 1.2 6.2 23.0 28.0 1.5 5.5 26.5 30.5 2.2 4.2 42.0 50.0 3.3 3.3 66.0 76.0 4.7 2.8 103 116 5.6 2.5 112 122 6.8 2.4 130 150 8.2 2.3 148 171 10 2.3 180 199 15 1.9 240 270 22 1.5 350 390 Saturation Current A 45.0 27.0 25.0 23.0 21.3 18.0 15.0 12.8 13.7 11.0 9.8 9.0 7.3 5.0 4 3.8 3.5 3.4 2.8 1.8 1 power.pulseelectronics.com P772. K (06/19) http://www.power.pulseelectronics.com/contact SMT Power Inductors High Current Molded Power Inductor - PA4345.XXXNLT & PM4345.XXXNLT Series Notes: 1. Actual temperature of the component during system operation (ambient plus verified in the end application. temperature rise) must be within the standard operating range. 5. Please note that the inductance tolerance of all parts are ±20%, except .101NLT and 2. The saturation current is the current at which the initial inductance drops approxi- .151NLT which are ±30%. mately 30% at the stated ambient temperature. This current is determined by placing 6. Parts shown in bold are standard catalog parts and are available through sample the compnent in the specified ambient environment and applying a short duration stock and distribution. Parts in lighter font are available but are not necessarily held pulse current (to eliminate self-heating effect) to the component. in sample stock or distribution and lead times may be longer. Please contact Pulse 3. The rated current is the DC current required to raise the component temperature by for availablity. approximately 40�C. Take note that the components’ performance varies depending 7. The PM prefix parts are AEC-Q200 qualified and has full automotive IATF16949 on the system condition. It is suggested that the component be tested at the system certification. The mechanical dimensions are 100% tested in production but do not level, to verify the temperature rise of the component during system operation. 4. The part temperature (ambient+temp rise) should not exceed 125�C under worst necessarily meet a product capability index (Cpk) 1.33 and therefore may not strictly conform to PPAP. case operating conditions. Circuit design, PCB trace size and thickness, airflow and 8. Special characteristics other cooling provisions all affect the part temperature. Part temperature should be PA4345/PM4345 Mechanical Final Layout SUGGESTED PAD LAYOUT Series A B C D E F G H PA4345/PM4345 6.0 Max 5.4 Max 2.0 Max (2.5) (3.5) (2.8) (2.0) (2.2) All Dimensions in mm. TAPE & REEL INFO Marking Marking WA K0 P1 Direction of tape G PA4545/PM4345 SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) A G P1 W Ø330 12 8 12 K0 2.3 QTY PCS/REEL 3000 2 power.pulseelectronics.com P772. K (06/19) http://www.power.pulseelectronics.com/contact SMT Power Inductors High Current Molded Power Inductor - PA4345.XXXNLT & PM4345.XXXNLT Series For More Information Pulse Worldwide Pulse Europe Headquarters Pulse Electronics GmbH 15255 Innovation Drive Ste 100 Am Rottland 12 San Diego, CA 92128 58540 Meinerzhagen U.S.A. Germany Pulse China Headquarters Pulse Electronics (ShenZhen) CO., LTD D708, Shenzhen Academy of Aerospace Technology, The 10th Keji South Road, Nanshan District, Shenzhen, P.R. China 518057 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 3 Fraser Street 0428 DUO Tower Singapore 189352 Pulse North Asia 1F., No.111 Xiyuan Rd Zhongli City Taoyuan City 32057 Taiwan (R.O.C) Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 2354 777 100 Fax: 49 2354 777 168 Tel: 86 755 33966678 Fax: 86 755 33966700 Tel: .


PM4345.472NLT PM4345.562NLT PM4345.682NLT


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)