Shielded Drum Core Inductor
Pulse Jack
Shielded Drum Core Inductor
PA4320 Series
Height: 10.0 Max
Electronics
Footprint: 12.3mm x 12.3mm Max
Cu...
Description
Pulse Jack
Shielded Drum Core Inductor
PA4320 Series
Height: 10.0 Max
Electronics
Footprint: 12.3mm x 12.3mm Max
Current Rating: up to 7.6A
Inductance Range: 10uH to 1000uH
PART NUMBER
PA4320.103NLT PA4320.153NLT PA4320.223NLT PA4320.473NLT PA4320.104NLT PA4320.154NLT PA4320.334NLT PA4320.105NLT
Inductance 100 KHz, 100 mV
(uH±20%) 10 15 22 47 100 150 330 1000
Electrical Specifications @ 25°C — Operating Temperature -40°C to 125°C
Rated Current
(A)
DCR (mOHMS MAX)
Saturation Current (Typical) A2 10% Drop 20% Drop 30% Drop
7.6 16
9.6 11.5 12.5
7.0 22 8.3 9.9 10.7
5.6 30 6.8 8.1 8.8
4.2 56 4.5 5.4 5.8
2.8 125 3.1 3.7 4.0
2.3 185 2.6 3.1 3.4
1.7 340 1.7 2.1 2.2
1.0 960 0.98
1.2
1.3
Heating Current 3 20°C Rise 40°C Rise
5.4 7.6 4.8 7.0 4.0 5.6 3.0 4.2 2.0 2.8 1.6 2.3 1.2 1.7 0.69 1.0
NOTES:
1. Actual temperature of the component during system operation (ambient plus temperature rise) 3. The Rated Current is the DC current required to raise the component temperature by the value
must be within the standard operating range.
shown. Take note that the component’s performance varies depending on the system condition.
2. The Saturation Current is the current at which the initial inductance drops approximately by the amount shown at the stated ambient temperature. This current is determined by placing the
It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation.
component in...
Similar Datasheet