DatasheetsPDF.com

PM2204.681NLT Dataheets PDF



Part Number PM2204.681NLT
Manufacturers Pulse
Logo Pulse
Description SMT Power Inductors
Datasheet PM2204.681NLT DatasheetPM2204.681NLT Datasheet (PDF)

SMT Power Inductors High Current Composite Inductor - PA5004.XXXNLT and PM2204.XXXNLT Height: 3.1mm Max Footprint: 6.8mm x 6.6mm Max Current Rating: up to 40Apk Inductance Range: 0.18uH to 4.5uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise Available in Commercial (PA5004) and Automotive (PM2204) grades Electrical Specifications @ 25°C, Operating Temperature Range per Below4,5 Part Number Commerical Automotive6 Inducta.

  PM2204.681NLT   PM2204.681NLT



Document
SMT Power Inductors High Current Composite Inductor - PA5004.XXXNLT and PM2204.XXXNLT Height: 3.1mm Max Footprint: 6.8mm x 6.6mm Max Current Rating: up to 40Apk Inductance Range: 0.18uH to 4.5uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise Available in Commercial (PA5004) and Automotive (PM2204) grades Electrical Specifications @ 25°C, Operating Temperature Range per Below4,5 Part Number Commerical Automotive6 Inductance 100KHz, 0.1V Rated3 Current DC Resistance TYP. MAX. Saturation2 Current (-40°C to 125°C) (-55°C to 155°C) uH±20% A mΩ mΩ A PA5004.181NLT PA5004.331NLT PA5004.561NLT PA5004.681NLT PA5004.102NLT PA5004.122NLT PA5004.152NLT PA5004.182NLT PA5004.222NLT PA5004.332NLT PA5004.452NLT PM2204.181NLT PM2204.331NLT PM2204.561NLT PM2204.681NLT PM2204.102NLT PM2204.122NLT PM2204.152NLT PM2204.182NLT PM2204.222NLT PM2204.332NLT PM2204.452NLT 0.18 0.33 0.56 0.68 1 1.2 1.5 1.8 2.2 3.3 4.5 32 1.6 1.75 40 25 2.25 2.5 32 22 3 3.31 29 20 4.7 5.17 25 18 5.5 6.05 23 16 6.7 7.4 22 15 8.3 9.13 20 14 9.2 10.2 18.2 10 11 12.2 15.9 8 18.8 20.8 12.2 7 23 25.3 10 Notes: K Factor for Core Loss 358.8 228.3 167.4 132.2 109.2 93 81 64.4 49.2 Mechanical D ±0.3 5.30 5.55 5.30 5.30 5.20 5.15 5.15 5.10 5.05 5.00 5.00 1. Actual temperature of the component during system operation (ambient plus 5. Parts shown in bold are standard catalog parts and are available through sample temperature rise) must be within the standard operating range. stock and distribution. Parts in lighter font are available but are not necessarily held 2. The saturation current is the current at which the initial inductance drops approxi- in sample stock or distribution and lead times may be longer. Please contact Pulse mately 30% at the stated ambient temperature. This current is determined by placing for availablity. the compnent in the specified ambient environment and applying a short duration 6. The PM2204.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The pulse current (to eliminate self-heating effect) to the component. mechanical dimensions are 100% tested in production but do not necessarily meet a 3. The rated current is the DC current required to raise the component temperature by product capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP. approximately 40�C. Take note that the components’ performanc varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 4. The part temperature (ambient+temp rise) should not exceed 125�C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 1 power.pulseelectronics.com P805. B (08/18) http://www.power..


PM2204.561NLT PM2204.681NLT PM2204.102NLT


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)