Dual Channel CCD Driver
EL7243
Dual Input, High Speed, Dual Channel CCD Driver
The EL7243 dual input, 2-channel driver achieves the same excell...
Description
EL7243
Dual Input, High Speed, Dual Channel CCD Driver
The EL7243 dual input, 2-channel driver achieves the same excellent switching performance of the EL7212 family while providing added flexibility. The power package makes this part extremely well suited for high frequency and heavy loads as in CCD applications. The 2-input logic and configuration is applicable to numerous power MOSFET drive circuits. As with other Elantec drivers, the EL7243 is excellent for driving large capacitive loads with minimal delay and switching times. “Shoot-thru” protection and latching circuits can be implemented by simply “crosscoupling” the 2-channels.
Pinout
EL7243 (20-PIN THERMAL SOIC)
TOP VIEW
Note 1: Pins 4–7 and 14–17 are electrically connected. Note 2: Output pins must be tied together.
Manufactured under U.S. Patent Nos. 5,334,883, #5,341,047
DATASHEET
Features
Logic AND/NAND input 3V and 5V Input compatible Clocking speeds up to 20MHz 20ns Switching/delay time 2A Peak drive Isolated drains Low output impedance Low quiescent current Wide operating voltage — 4.5V to 16V Pb-Free available (RoHS compliant)
Applications
CCD Drivers Short circuit protected switching Under-voltage shut-down circuits Switch-mode power supplies Motor controls Power MOSFET switching Switching capacitive loads Shoot-thru protection Latching drivers
FN7286 Rev 1.00 May 13, 2005
Ordering Information
PART NUMBER PACKAGE
TAPE & REEL
PKG. DWG. #
EL7243CM
20-Pin SOIC
...
Similar Datasheet