EL5372

EL5172, EL5372 250MHz Differential Line Receivers The EL5172 and EL5372 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments. They are primarily targeted for applications such as receiving signals from twisted-pair lines or any application where common mode noise injection is likely to occur. The EL5172 and EL5372 are stable for a gain of one and requires two external resistors to set the voltage gain. The output common mode level is set by the reference pin (VREF), which has a -3dB bandwidth of over 120MHz. Generally, this pin is grounded but it can be tied to any voltage reference. The output can deliver a maximum of ±60mA and is short circuit protected to withstand a temporary overload condition. The EL5172 is available in the 8 Ld SOIC and 8 Ld MSOP packages and the EL5372 in a 24 Ld QSOP package. Both are specified for operation over the full -40°C to +85°C temperature range. Pinouts EL5172 (8 LD SOIC, MSOP) TOP VIEW EL5372 (24 LD QSOP) TOP VIEW FB 1 IN+ 2 IN- 3 REF 4 + - 8 OUT REF1 1 7 VS- INP1 2 6 VS+ INN1 3 5 EN NC 4 REF2 5 INP2 6 INN2 7 NC 8 REF3 9 INP3 10 INN3 11 NC 12 + + + - 24 NC 23 FB1 22 OUT1 21 NC 20 VSP 19 VSN 18 NC 17 FB2 16 OUT2 15 EN 14 FB3 13 OUT3 DATASHEET FN7311 Rev 11.00 August 11, 2015 Features Differential input range ±2.3V 250MHz 3dB bandwidth 800V/µs slew rate 60mA maximum output current Single 5V or dual ±5V supplies Low power - 5mA to 6mA per channe...