EL4093

® Data Sheet January 1996, Rev B EL4093 FN7159 300MHz DC-Restored Video Amplifier The EL4093 is a complete DCrestored video amplifier subsystem, featuring low power consumption and high slew rate. It contains a current feedback amplifier and a sample and hold amplifier designed to stabilize video performance. When the HOLD logic input is low, the sample and hold may be used as a general purpose op amp to null the DC offset of the video amplifier. When the HOLD input goes high the sample and hold stores the correction voltage on the hold capacitor to maintain DC correction during the subsequent video scan line. The sample and hold amplifier contains a current output stage that greatly simplifies its connection to the video amplifier. Its high output impedance also helps to preserve video linearity at low supply voltages. For ease of interfacing, the HOLD input is TTL-compatible. This device has an operational temperature of -40°C to +85°C and is packaged in plastic 16-pin DIP and 16-pin SOIC. Pinout EL4093 (16-PIN PDIP, SO) TOP VIEW Features High accuracy DC restoration for video Low supply current of 9.5mA typ. 300MHz bandwidth 1500V/µs slew rate 0.04% differential gain and 0.02° differential phase into 150Ω for NTSC 1.5mV max. restored DC offset Sample and hold amplifier with fast enable and low leakage TTL-compatible HOLD logic input Applications Input amplifier in video equipment Restoration amplifier in video mixers Ordering Information PART NUMB...