Medium Power Differential Line Driver
EL1511
Medium Power Differential Line Driver
The EL1511 is a dual operational amplifier designed for customer premise li...
Description
EL1511
Medium Power Differential Line Driver
The EL1511 is a dual operational amplifier designed for customer premise line driving in DMT ADSL solutions. This device features a high drive capability of 360mA while consuming only 7.5mA of supply current per amplifier and operating from a single 5V to 15V supply. This driver achieves a typical distortion of less than -85dBc, at 150kHz into a 25 load. The EL1511 is available in the thermallyenhanced 16 Ld SOIC (0.150") and a 16 Ld QFN (4x4mm) packages. The EL1511 is specified for operation over the full -40°C to +85°C temperature range. Electrical characteristics are given for typical 15V supply operation.
The EL1511 has two control pins, C0 and C1, which allow the selection of full IS power, 3/4-IS, 1/2-IS, and power-down modes.
The EL1511 is ideal for ADSL, SDSL, and HDSL2 line driving applications for single power supply, high voltage swing, and low power.
The EL1511 maintains excellent distortion and load driving capabilities even in the lowest power settings.
Pinouts
EL1511 [16 LD SO (0.150”)]
TOP VIEW
NC 1 VOUTA 2
VIN-A 3
16 VS+
+ -
+ -
15 VOUTB
14 VIN-B
GND* 4
13 GND*
GND* 5
12 GND*
VIN+A 6
11 VIN+B
GND 7 VS- 8
POWER CONTROL
LOGIC
10 C1 9 C0
NOTE: * These GND pins are heat spreaders
NC 5 NC 6 VS- 7 C0 8
DATASHEET
FN7016 Rev 2.00 April 10, 2007
Features
Drives up to 360mA from a +15V supply 24VP-P differential output drive into 25and 26VP-P
differential output drive into 100 -85dBc typical dr...
Similar Datasheet