Dual Channel Differential DSL Line Driver
DATA SHORT
EL1528
Dual Channel Differential DSL Line Driver
To request the full datasheet, please visit www.intersil.c...
Description
DATA SHORT
EL1528
Dual Channel Differential DSL Line Driver
To request the full datasheet, please visit www.intersil.com/products/EL1528
OBSOLETE PRODUCT
NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc
FN7002 Rev 1.00 September 21, 2004
The EL1528 is a dual channel differential amplifier designed for driving full rate ADSL signals at very low power dissipation. The high drive capability of 450mA makes this driver ideal for both CAP and DMT designs. It contains two pairs of wideband, high-voltage, current mode feedback amplifiers optimized for low power consumption in DSL systems.
These drivers achieve an MTPR distortion measurement of better than 70dB, while consuming typically 5mA per DSL channel of total supply current. This supply current can be set using a resistor on the IADJ pin. Two other pins (C0 & C1) can also be used to adjust supply current to one of four preset modes (full-IS, 3/4-IS, 1/2-IS, and full power-down). The EL1528 operates on ±5V to ±12V supplies and retains its bandwidth and linearity over the complete supply range.
The device is supplied in a thermally-enhanced 20-pin HTSSOP and the small footprint (4x5mm) 24-pin QFN packages. The EL1528 is specified for operation over the full -40°C to +85°C temperature range.
Pinouts
EL1528 (24-PIN QFN)
TOP VIEW
Features
Pb-free available 450mA output drive capability 44.4VP-P differential output drive into 100 -75dBc THD @ 500kHz 16VP-P M...
Similar Datasheet