HIP6501A
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT
contact our Technical Support Center at 1-888-INTER...
HIP6501A
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT
contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc
Triple Linear Power Controller with ACPI Control Interface
DATASHEET
FN4749 Rev 6.00 December 30, 2004
The HIP6501A, paired with either the HIP6020 or HIP6021, simplifies the implementation of ACPI-compliant designs in microprocessor and computer applications. The IC integrates two linear controllers and a low-current pass
transistor, as well as the monitoring and control functions into a 16-pin SOIC package. One linear controller generates the 3.3VDUAL voltage plane from an ATX power supply’s 5VSB output during sleep states (S3, S4/S5), powering the PCI slots through an external pass
transistor, as instructed by the status of the 3.3VDUAL enable pin. An additional pass
transistor is used to switch in the ATX 3.3V output for PCI operation during S0 and S1 (active) operatingstates. The second linear controller supplies the computer system’s 2.5V/3.3V memory power through an external pass
transistor in active states. During S3 state, an integrated pass
transistor supplies the 2.5V/3.3V sleep-state power. A third controller powers up a 5VDUAL plane by switching in the ATX 5V output in active states, or the ATX 5VSB in sleep states.
The HIP6501A’s operating mode (active-state outputs or sleep-state outputs) is selectable through two control pins: S3 and S5. Further control of the logic governing activation of different power modes ...