ISL70062SEH

Datasheet ISL70062SEH, ISL73062SEH Radiation Hardened 10A NMOS Load Switch The ISL70062SEH and ISL73062SEH (ISL7x062SEH) are radiation hardened single channel load switches featuring ultra-low rON and controlled rise time. These devices use a NMOS pass device as the main switch that operates across an input voltage range of 0V to (VCC -2V) and can support a maximum of 10A continuous current. The devices have a VCC pin to power the logic and driver. The VCC voltage range is 3V to 5.5V. Simple ON/OFF digital control inputs make the device capable of interfacing directly with low voltage control signals from an FPGA, MCU, or processor. Additional features include reverse current protection to stop current from flowing toward the input when the output SWO voltage increases above the input SWI voltage, a selectable 100Ω MOSFET to discharge the output, and Undervoltage Lockout (UVLO) protection that keeps the switch OFF when the VCC voltage is too low. The ISL7x062SEH devices operate across the military temperature range from -55°C to +125°C and are available in a 14 Ld hermetically sealed Ceramic Dual Flatpack (CDFP) package or in die form. Applications Satellites power distribution management Power system redundancy Power sequencing Power system fault management Space VPX systems Features Electrically screened to DLA SMD 5962-19212 Integrated high speed load switch ○ Turn-off time of 3µs Ultra-low ON-resistance (rON) of 25mΩ typical Continuous 10A switch curr...