11.1Gb/s Lane Extender
QLx111GRx
11.1Gb/s Lane Extender
The QLx111GRx is a settable single-channel receiveside equalizer with extended function...
Description
QLx111GRx
11.1Gb/s Lane Extender
The QLx111GRx is a settable single-channel receiveside equalizer with extended functionality for advanced protocols operating with line rates up to 11.1Gb/s such as 10G Ethernet (10GBase-CR). The QLx111GRx compensates for the frequency dependent attenuation of copper twin-axial cables, extending the signal reach up to at least 10m on 28AWG cable. The small form factor, highly-integrated design is ideal for high-density data transmission applications including active copper cable assemblies. The equalizing filter within the QLx111GRx can be set to provide optimal signal fidelity for a given media and length. The compensation level for the filter is set by two external control pins. Operating on a single 1.2V power supply, the QLx111GRx enables per channel throughputs of 10Gb/s to 11.1Gb/s while supporting lower data rates including 8.5, 6.25, 5, 4.25, 3.125, and 2.5Gb/s. The QLx111GRx uses current mode logic (CML) input/output and is packaged in a 3mmx3mm 16 lead QFN. LOS support is included for module applications.
Typical Application Circuit
DATASHEET
FN6987 Rev 0.00 October 26, 2009
Features
Supports data rates up to 11.1Gb/s Low power (<135mW) Low latency (<500ps) Single channel equalizer in a 3mmx3mm QFN
package for straight route-through architecture and simplified routing Adjustable equalizer boost Supports 64b/66b encoded data – long run lengths Line silence preservation 1.2V supply voltage LOS support
Applications
...
Similar Datasheet