Operational Amplifier
www.ti.com
OPA3691
OPA3691
OPA3691
SBOS227E – DECEMBER 2001 – REVISED JULY 2008
Triple Wideband, Current-Feedback OP...
Description
www.ti.com
OPA3691
OPA3691
OPA3691
SBOS227E – DECEMBER 2001 – REVISED JULY 2008
Triple Wideband, Current-Feedback OPERATIONAL AMPLIFIER With Disable
FEATURES
DESCRIPTION
q FLEXIBLE SUPPLY RANGE: +5V to +12V Single-Supply ±2.5V to ±6V Dual Supply
q UNITY-GAIN STABLE: 280MHz (G = 1)
q HIGH OUTPUT CURRENT: 190mA
q OUTPUT VOLTAGE SWING: ±4.0V q HIGH SLEW RATE: 2100V/µs q LOW SUPPLY CURRENT: 5.1mA/ch
q LOW DISABLED CURRENT: 150µA/ch q IMPROVED HIGH-FREQUENCY PINOUT
q WIDEBAND +5V OPERATION: 190MHz (G = +2)
APPLICATIONS
q RGB AMPLIFIERS q WIDEBAND INA q BROADBAND VIDEO BUFFERS q HIGH-SPEED IMAGING CHANNELS q PORTABLE INSTRUMENTS q ADC BUFFERS q ACTIVE FILTERS q CABLE DRIVERS
+5V
V1 1/3 OPA3691
–5V 301Ω
250Ω 250Ω
+5V
1/3 OPA3691
10 (V1 – V2)
The OPA3691 sets a new level of performance for broadband, triple current-feedback op amps. Operating on a very low 5.1mA/ch supply current, the OPA3691 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers a high output current with minimal voltage headroom and crossover distortion. This gives exceptional singlesupply operation. Using a single +5V supply, the OPA3691 can deliver a 1V to 4V output swing with over 120mA drive current and 150MHz bandwidth. This combination of features makes the OPA3691 an ideal RGB line driver or single-supply Analog-to-Digital Converter (ADC) input driver.
The OPA3691’s low 5.1mA/ch supply current is precisely trimmed at...
Similar Datasheet