Quad Digital Potentionmeter
DATASHEET
X9241A
Quad Digital Controlled Potentionmeters (XDCP™) Non-Volatile/Low Power/2-Wire/64 Taps
FN8164 Rev 7.00...
Description
DATASHEET
X9241A
Quad Digital Controlled Potentionmeters (XDCP™) Non-Volatile/Low Power/2-Wire/64 Taps
FN8164 Rev 7.00 August 17, 2015
The X9241A integrates four digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated microcircuit.
The digitally controlled potentiometer is implemented using 63 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the 2-wire bus interface. Each potentiometer has associated with it a volatile Wiper Counter Register (WCR) and 4 nonvolatile Data Registers (DR0:DR3) that can be directly written to and read by the user. The contents of the WCR controls the position of the wiper on the resistor array through the switches. Power up recalls the contents of DR0 to the WCR.
The XDCP can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.
Features
Four potentiometers in one package
2-wire serial interface
Register oriented format - Direct read/write/transfer of wiper positions - Store as many as four positions per potentiometer
Terminal Voltages: +5V, -3.0V
Cascade resistor arrays
Low power CMOS
High Reliability - Endurance–100,000 data changes per bit per register - Register data retention–100 years
16-bytes of nonvolatile memory
3 resistor array ...
Similar Datasheet