Dual Path RF Switch
Dual Path RF Switch with LNA and DVGA 3300MHz to 4000MHz
F0453C
Datasheet
Description
The F0453C is an integrated dual...
Description
Dual Path RF Switch with LNA and DVGA 3300MHz to 4000MHz
F0453C
Datasheet
Description
The F0453C is an integrated dual-path RF front-end consisting of an RF switch and two gain stages with 6dB gain control used in the analog front-end receiver of an Active Antenna System (AAS). The F0453C supports frequencies from 3300MHz to 4000MHz.
The F0453C provides 35dB gain with +23dBm OIP3, +15dBm output P1dB, and 1.35dB noise figure at 3500MHz. Gain is reduced 6dB in a single step with a maximum gain settling time of 31ns. The device uses a single 3.3V supply and 130mA of IDD.
The F0453C is offered in a 6 × 6 × 0.75 mm, 32-LGA package with 50Ω input and output amplifier impedances for ease of integration into the signal path.
Competitive Advantage
High integration Low noise and high linearity On-chip matching and bias Extremely low current consumption
Features
Gain at 3500MHz 35dB typical in High Gain Mode 29dB typical in Low Gain Mode
1.35dB NF at 3500MHz +23dBm OIP3 at 3500MHz OP1dB at 3500MHz
+15dBm in High Gain Mode +14dBm in Low Gain Mode 50Ω single-ended input / output amplifier impedances IDD = 130mA Independent Standby Mode for power savings Supply voltage: +3.15V to +3.45V 6 × 6 mm, 32-pin LGA package -40°C to +105°C exposed pad operating temperature range
Block Diagram
RX1_OUT VDD VDD SW1_OUT
Typical Applications
Multi-mode, Multi-carrier receivers AAS Rx Front-End 4.5G (LTE Advanced) 5G NR band n48, n77, and n78
STBY1 ATT1_...
Similar Datasheet