Crystal or Differential-to-Differential Clock
Crystal or Differential-to-Differential Clock Fanout Buffer
8T39210 Datasheet
Description
The 8T39210 is a high-perfor...
Description
Crystal or Differential-to-Differential Clock Fanout Buffer
8T39210 Datasheet
Description
The 8T39210 is a high-performance clock fanout buffer. The input clock can be selected from two differential inputs or one crystal input. The internal oscillator circuit is automatically disabled if the crystal input is not selected. The crystal pin can be driven by a single-ended clock. The selected signal is distributed to ten differential outputs that can be configured as LVPECL, LVDS, or HCSL outputs. In addition, an LVCMOS output is provided. All outputs can be disabled into a high-impedance state.
The device is designed for a signal fanout of high-frequency, low phase-noise clock and data signal. The outputs are at a defined level when inputs are open or tied to ground. It is designed to operate from a 3.3V or 2.5V core power supply, and either a 3.3V or 2.5V output operating supply.
Block Diagram
SMODEA[1:0] Pull-down
REF_SEL[1:0] Pull-down
CLK0 00
nC LK0
CLK1 01
nC LK1
XTAL_IN OSC
10 or
XTAL_OUT
11
SMODEB[1:0] Pull-down
OE_SE Pull-down
Sync
QA0 nQA0 QA1 nQA1 QA2 nQA2 QA3 nQA3 QA4 nQA4
QB0 nQB0 QB1 nQB1 QB2 nQB2 QB3 nQB3 QB4 nQB4
REFOUT
Features
▪ Two differential reference clock input pairs
▪ Differential input pairs can accept the following differential input levels: LVPECL, LVDS, HCSL, HSTL, or Single ended
▪ Crystal Input accepts 10MHz to 40MHz Crystal or Single-ended Clock
▪ Maximum Output Frequency
LVPECL - 1.5GHz LVDS - 1.5GHz HCSL - 750MHz LVCMOS - 2...
Similar Datasheet