DatasheetsPDF.com

PIC24FJ128GU410 Dataheets PDF



Part Number PIC24FJ128GU410
Manufacturers Microchip
Logo Microchip
Description 16-Bit Microcontrollers
Datasheet PIC24FJ128GU410 DatasheetPIC24FJ128GU410 Datasheet (PDF)

PIC24FJ512GU410 Family Data Sheet 16-Bit eXtreme Low-Power Microcontrollers with LCD Controller and USB High-Performance CPU • Modified Harvard Architecture • 512 Kbytes Flash Memory • 32 Kbytes RAM • Up to 16 MIPS Operation @ 32 MHz • 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier • 32-Bit by 16-Bit Hardware Divider • 16-Bit x 16-Bit Working Register Array • C Compiler Optimized Instruction Set Architecture • Two Address Generation Units for Separate Read and Write Addressi.

  PIC24FJ128GU410   PIC24FJ128GU410


Document
PIC24FJ512GU410 Family Data Sheet 16-Bit eXtreme Low-Power Microcontrollers with LCD Controller and USB High-Performance CPU • Modified Harvard Architecture • 512 Kbytes Flash Memory • 32 Kbytes RAM • Up to 16 MIPS Operation @ 32 MHz • 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier • 32-Bit by 16-Bit Hardware Divider • 16-Bit x 16-Bit Working Register Array • C Compiler Optimized Instruction Set Architecture • Two Address Generation Units for Separate Read and Write Addressing of Data Memory LCD Display Controller • 64 Segments and 8 Commons Supporting up to 480 Pixels • LCD Charge Pump with 5 µA Low Power • Core-Independent LCD Animation • Operation in Sleep Mode Analog Features • Up to 24-Channel, Software Selectable 10/12-Bit Analog-to-Digital Converter: – 12-bit, 350K samples/second conversion rate (single Sample-and-Hold) – 10-bit, 400K samples/second conversion rate (single Sample-and-Hold) – Sleep mode operation – Low-voltage boost for input – Band gap reference input feature – Core-independent windowed threshold compare feature – Auto-scan feature • Three Analog Comparators with Input Multiplexing: – Programmable reference voltage for comparators • 10-Bit, 1 Msps DAC with Buffered Output © 2019-2021 Microchip Technology Inc. and its subsidiaries Datasheet DS30010203D-page 1 PIC24FJ512GU410 Family Data Sheet eXtreme Low-Power Features • Sleep and Idle modes Selectively Shut Down: – Peripherals and/or core for substantial power reduction and fast wake-up • Doze mode Allows CPU to Run at a Lower Clock Speed than Peripherals • Alternate Clock modes Allow On-the-Fly: – Switching to a lower clock speed for selective power reduction • Retention Sleep with On-Chip Ultra Low-Power Retention Regulator Functional Safety and Security Peripherals • Fail-Safe Clock Monitor Operation: – Detects clock failure and switches to on-chip, low-power RC Oscillator • Power-on Reset (POR), Brown-out Reset (BOR) • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Programmable High or Low-Voltage Detect (HLVD) • Flexible Watchdog Timer (WDT) with RC Oscillator for Reliable Operation • Deadman Timer (DMT) for Safety-Critical Applications • Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator • Flash Configurable as OTP by ICSP™ Write Inhibit • CodeGuard™ Security • ECC Flash Memory with Fault Injection: – Single Error Correction (SEC) – Double-Error Detection (DED) • Customer OTP Memory • Unique Device Identifier (UDID), 120-Bit Unique ID Special Microcontroller Features • Supply Voltage Range of 2.0V to 3.6V • Operating Ambient Temperature Range of -40°C to +125°C • On-Chip Voltage Regulators (1.8V) for Low-Power Operation • Large, Dual Partition Flash Program Array: – The device’s Flash memory can be configured into two physical sections or a single physical section – Capable of holding two independent software applications, including bootloader – Permits simultaneous programming of one partition while executing application code from the other – Allows run-time switching between Active Partitions • Flash Memory: – 10,000 erase/write cycle endurance, typical – Data retention: 20 years minimum – Self-programmable under software control – Flash OTP emulation • 8 MHz Fast RC Internal Oscillator: – Multiple clock divide options – Fast start-up • 96 MHz PLL Option • Programmable Reference Clock Output • In-Circuit Serial Programming™ (ICSP™) and In-Circuit Emulation (ICE) via Two Pins © 2019-2021 Microchip Technology Inc. and its subsidiaries Datasheet DS30010203D-page 2 PIC24FJ512GU410 Family Data Sheet • JTAG Boundary Scan Support Peripheral Features • Independent, Low-Power 32 kHz Timer Oscillator • Six-Channel DMA Controller: – Minimizes CPU overhead and increases data throughput • Timer1: 16-Bit Timer/Counter with External Crystal Oscillator; Timer1 can Provide an A/D Trigger • Timer2,3,4,5: 16-Bit Timer/Counter, can Create 32-Bit Timer; Timer3 and Timer5 can Provide an A/D Trigger • Eight MCCP modules, Each with a Dedicated 16/32-Bit Timer: – Three 6-output MCCP modules – Five 2-output MCCP modules • Four Variable Widths, Serial Peripheral Interface (SPI) Ports on All Devices; Three Operation modes: – Three-wire SPI (supports all four SPI modes) – Up to 32-byte deep FIFO buffer – I2S mode – Speed up to 24 MHz • Three I2C Master and Slave w/Address Masking, PMBus™ and IPMI Support • Six UART modules: – LIN/J2602 bus support (auto-wake-up, Auto-Baud Detect, Break character support) – RS-232 and RS-485 support – IrDA® mode (hardware encoder/decoder functions) • Five External Interrupt Pins • Hardware Real-Time Clock and Calendar (RTCC) • Peripheral Pin Select (PPS) allows Independent I/O Mapping of Many Peripherals • Configurable Interrupt-on-Change on All I/O Pins: – Each pin is independentl.


PIC24FJ256GU405 PIC24FJ128GU410 PIC24FJ128GU408


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)