RRIO Op Amp
TLV9051, TLV9052, TLV9054
SBOS942I – AUGUST 2018 – REVISED NOVEMBER 2022
TLV9051 / TLV9052 / TLV9054 5-MHz, 15-V/µs High...
Description
TLV9051, TLV9052, TLV9054
SBOS942I – AUGUST 2018 – REVISED NOVEMBER 2022
TLV9051 / TLV9052 / TLV9054 5-MHz, 15-V/µs High Slew-Rate, RRIO Op Amp
1 Features
High slew rate: 15 V/µs Low quiescent current: 330 µA Rail-to-rail input and output Low input offset voltage: ±0.33 mV Unity-gain bandwidth: 5 MHz Low broadband noise: 15 nV/√ Hz Low input bias current: 2 pA Unity-gain stable Internal RFI and EMI filter Scalable family of CMOS op amps for low-cost
applications Operational at supply voltages as low as 1.8 V Extended temperature range: –40°C to 125°C
2 Applications
HVAC: heating, ventilating, and air conditioning Photodiode amplifier Current shunt monitoring for DC motor control White goods (refrigerators, washing machines, and
so forth) Sensor signal conditioning Active filters Low-side current sensing
3 Description
The TLV9051, TLV9052, and TLV9054 devices are single, dual, and quad operational amplifiers, respectively. The devices are designed for low voltage operation from 1.8 V to 6.0 V. The inputs and outputs can operate from rail to rail at a very high slew rate. These devices are an excellent choice for costconstrained applications where low-voltage operation, high slew rate, and low quiescent current is needed. The capacitive-load drive of the TLV905x family is 150 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads.
The TLV905xS devices include a shutdown mode that allow...
Similar Datasheet