DatasheetsPDF.com

515D107M016AA6AE3 Dataheets PDF



Part Number 515D107M016AA6AE3
Manufacturers Vishay
Logo Vishay
Description Aluminum Capacitor
Datasheet 515D107M016AA6AE3 Datasheet515D107M016AA6AE3 Datasheet (PDF)

www.vishay.com Not for New Designs 515D Vishay Sprague Aluminum Capacitors +85 °C, Miniature, Radial Lead FEATURES • High CV per case size • Low cost • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size Ø D x L in mm 0.197" x 0.433" [5.0 x 11.0] to 0.709" x 1.575" [18.0 x 40.0] Operating temperature Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Termination -40 °C to +.

  515D107M016AA6AE3   515D107M016AA6AE3


Document
www.vishay.com Not for New Designs 515D Vishay Sprague Aluminum Capacitors +85 °C, Miniature, Radial Lead FEATURES • High CV per case size • Low cost • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size Ø D x L in mm 0.197" x 0.433" [5.0 x 11.0] to 0.709" x 1.575" [18.0 x 40.0] Operating temperature Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Termination -40 °C to +85 °C -25 °C to +85 °C for 315 WVDC to 450 WVDC units 0.1 μF to 18 000 μF ± 20 % 6.3 WVDC to 450 WVDC 2 radial leads Life validation test at 85 °C 2000 h: ΔCAP ± 20 % from initial measurement. ΔDF 2 x initial specified limit. ΔDCL ≤ initial specified limit. Shelf life at 85 °C 1000 h: ΔCAP ± 20 % from initial measurement. ΔDF 2 x initial specified limit. ΔDCL ≤ initial specified limit. DC leakage current Rated voltage for 1 and 2 min for 6.3 WVDC to 100 WVDC units: I < 0.03 CV or 4 μA (whichever is greater). I < 0.04 CV or 3 μA (whichever is greater). Rated voltage for 1 min for 160 WVDC to 450 WVDC units: I < 0.1 CV + 40 μA and CV ≤ 1000; I < 0.04 CV + 100 μA and CV > 1000 RIPPLE CURRENT MULTIPLIERS TEMPERATURE AMBIENT TEMPERATURE MULTIPLIERS ≤ +70 °C 1.27 +85 °C 1.0 FREQUENCY (Hz) WVDC CAP. (μF) 50 TO 60 100 TO 120 300 TO 400 1 kHz ≥ 10 kHz 0 to 47 0.75 1 1.35 1.57 2.00 6.3 to 100 100 to 470 0.80 1 1.23 1.34 1.50 1000 to 18 000 0.85 1 1.10 1.13 1.15 160 to 450 0.47 to 220 0.80 1 1.25 1.40 1.60 LOW TEMPERATURE PERFORMANCE MAXIMUM IMPEDANCE RATIO Z(T) / Z(+20 °C) MAXIMUM AT 120 Hz RATED VOLTAGE (WVDC) Z - 25 °C / Z + 20 °C Z - 40 °C / Z + 20 °C 6.3 4.0 10.0 10.0 3.0 8.0 16.0 2.0 6.0 25.0 2.0 4.0 35.0 to 100.0 2.0 3.0 160.0 to 200.0 3.0 4.0 250.0 3.0 6.0 315.0 to 400.0 6.0 - 450.0 15.0 - DIMENSIONS in inches [millimeters] CASE CODE NOMINAL CASE SIZE DxL JA 0.197 x 0.433 [5.0 x 11.0] AA 0.248 x 0.433 [6.3 x 11.0] BB 0.315 x 0.453 [8.0 x 11.5] CC 0.394 x 0.492 [10.0 x 12.5] CD 0.394 x 0.630 [10.0 x 16.0] CG 0.394 x 0.787 [10.0 x 20.0] LEAD SPACING S 0.079 [2.0] 0.098 [2.5] 0.138 [3.5] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] NOMINAL LEAD DIAMETER D 0.020 [0.50] 0.020 [0.50] 0.024 [0.60] 0.024 [0.60] 0.024 [0.60] 0.024 [0.60] TYPICAL WEIGHT (g) 0.44 0.60 0.95 1.48 1.75 2.37 Revision: 04-May-2018 1 Document Number: 42052 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com Not for New Designs 515D Vishay Sprague DIMENSIONS in inches [millimeters] CASE CODE NOMINAL CASE SIZE DxL DG 0.492 x 0.787 [12.5 x 20.0] DK 0.492 x 0.984 [12.5 x 25.0] EK 0.630 x 0.984 [16.0 x 25.0] EN 0.630 x 1.240 [16.0 x 31.5] ER 0.630 x 1.398 [16.0 x 35.5] FR 0.709 x 1.398 [18.0 x 35.5] FV 0.709 x 1.575 [18.0 x 40.0] LEAD SPACING S 0.197 [5.0] 0.197 [5.0] 0.295 [7.5] 0.295 [7.5] 0.295 [7.5] 0.295 [7.5] 0.295 [7.5] NOMINAL LEAD DIAMETER D 0.024 [0.60] 0.024 [0.60] 0.031 [0.80] 0.031 [0.80] 0.031 [0.80] 0.031 [0.80] 0.031 [0.80] TYPICAL WEIGHT (g) 3.73 4.85 7.08 8.94 10.50 12.53 15.71 ELECTROLYTIC CAPACITOR WITH CUT OR FORMED LEADS in inches [millimeters] Code F D X 0.177 [4.5] Code S X 0.177 [4.5] Code S F (1) 0.197 [5.0 ± ± 0.20 0.5] D 0.197 ± 0.20 F (1) [5.0 ± 0.5] D Ø d (2) Ø d (2) 0.177 [4.5] F (1) 0.197 [5.0 ± ± 0.20 0.5] Ø d (2) Code C D 0.177 [4.5] S ± 0.20 [0.5] Ø d (2) Code S (4, 5, 6.3, 8) 0.033 ± 0.006 [0.85 ± 0.15] Code S 0.039 ± 0.008 [1.0 ± 0.2] (10, 12.5, 16, 18) DIMENSIONS in inches [millimeters] FORMING METHOD Formed and cut FORMED LEAD CODE F Cut C Snap-in S D 0.197 [5.0] 0.248 [6.3] 0.315 [8.0] 0.394 [10.0] 0.492 [12.5] 0.630 [16.0] 0.709 [18.0] 0.197 [5.0] 0.248 [6.3] 0.315 [8.0] 0.394 [10.0] 0.492 [12.5] 0.630 [16.0] 0.709 [18.0] L.S. 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.295 [7.5] 0.295 [7.5] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.295 [7.5] 0.295 [7.5] DIMENSIONS P 0.079 [2.0] 0.098 [2.5] 0.138 [3.5] 0.079 [2.0] 0.098 [2.5] 0.138 [3.5] - e (3) - 0.043 [1.1] 0.043 [1.1] 0.051 [1.3] 0.051 [1.3] 0.051 [1.3] 0.051 [1.3] 0.051 [1.3] Notes • Coding of cut or formed lead to be added to the end of type number in 15th position (with position 14 coded “6”) (1) Formed lead (2) Lead thickness Ø d depends on capacitor specification (3) Lead protrusion at bottom of tape X (Max.) 0.059 [1.5] 0.098 [2.5] 0.098 [2.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] - Revision: 04-May-2018 2 Document Number: 42052 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, .


515D476M016JA6AE3 515D107M016AA6AE3 515D227M016BB6AE3


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)