www.vishay.com
Not for New Designs
515D
Vishay Sprague
Aluminum Capacitors +85 °C, Miniature, Radial Lead
FEATURES • High CV per case size
• Low cost
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Nominal case size Ø D x L in mm
0.197" x 0.433" [5.0 x 11.0] to 0.709" x 1.575" [18.0 x 40.0]
Operating temperature
Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Termination
-40 °C to +85 °C -25 °C to +85 °C for 315 WVDC
to 450 WVDC units
0.1 μF to 18 000 μF
± 20 %
6.3 WVDC to 450 WVDC
2 radial leads
Life validation test at 85 °C
2000 h: ΔCAP ± 20 % from initial measurement.
ΔDF 2 x initial specified limit. ΔDCL ≤ initial specified limit.
Shelf life at 85 °C
1000 h: ΔCAP ± 20 % from initial measurement.
ΔDF 2 x initial specified limit. ΔDCL ≤ initial specified limit.
DC leakage current
Rated voltage for 1 and 2 min for 6.3 WVDC to 100 WVDC units: I < 0.03 CV or 4 μA (whichever is greater). I < 0.04 CV or 3 μA (whichever is greater). Rated voltage for 1 min for 160 WVDC to 450 WVDC units: I < 0.1 CV + 40 μA and
CV ≤ 1000; I < 0.04 CV + 100 μA and CV > 1000
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE
MULTIPLIERS
≤ +70 °C
1.27
+85 °C
1.0
FREQUENCY (Hz)
WVDC
CAP. (μF)
50 TO 60
100 TO 120
300 TO 400
1 kHz ≥ 10 kHz
0 to 47
0.75 1
1.35 1.57 2.00
6.3 to 100 100 to 470 0.80 1
1.23 1.34 1.50
1000 to 18 000 0.85 1
1.10 1.13 1.15
160 to 450 0.47 to 220 0.80 1
1.25 1.40 1.60
LOW TEMPERATURE PERFORMANCE
MAXIMUM IMPEDANCE RATIO Z(T) / Z(+20 °C) MAXIMUM AT 120 Hz
RATED VOLTAGE (WVDC)
Z - 25 °C / Z + 20 °C Z - 40 °C / Z + 20 °C
6.3
4.0
10.0
10.0
3.0
8.0
16.0
2.0
6.0
25.0
2.0
4.0
35.0 to 100.0
2.0
3.0
160.0 to 200.0
3.0
4.0
250.0
3.0
6.0
315.0 to 400.0
6.0
-
450.0
15.0
-
DIMENSIONS in inches [millimeters]
CASE CODE
NOMINAL CASE SIZE DxL
JA
0.197 x 0.433 [5.0 x 11.0]
AA
0.248 x 0.433 [6.3 x 11.0]
BB
0.315 x 0.453 [8.0 x 11.5]
CC
0.394 x 0.492 [10.0 x 12.5]
CD
0.394 x 0.630 [10.0 x 16.0]
CG
0.394 x 0.787 [10.0 x 20.0]
LEAD SPACING S
0.079 [2.0] 0.098 [2.5] 0.138 [3.5] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0]
NOMINAL LEAD DIAMETER D
0.020 [0.50] 0.020 [0.50] 0.024 [0.60] 0.024 [0.60] 0.024 [0.60] 0.024 [0.60]
TYPICAL WEIGHT (g) 0.44 0.60 0.95 1.48 1.75 2.37
Revision: 04-May-2018
1
Document Number: 42052
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
Not for New Designs
515D
Vishay Sprague
DIMENSIONS in inches [millimeters]
CASE CODE
NOMINAL CASE SIZE DxL
DG
0.492 x 0.787 [12.5 x 20.0]
DK
0.492 x 0.984 [12.5 x 25.0]
EK
0.630 x 0.984 [16.0 x 25.0]
EN
0.630 x 1.240 [16.0 x 31.5]
ER
0.630 x 1.398 [16.0 x 35.5]
FR
0.709 x 1.398 [18.0 x 35.5]
FV
0.709 x 1.