www.vishay.com
Not for New Designs
516D
Vishay Sprague
Aluminum Capacitors +85 °C, Miniature, Axial Lead
FEATURES
• High CV per case size
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Nominal case size Ø D x L in mm
0.197" x 0.472" [5.0 x 12.0] to 0.709" x 1.614" [18.0 x 41.0]
Operating temperature
Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Termination
-40 °C to +85 °C (-25 °C to +85 °C for 315 WVDC to 450 WVDC units) 0.47 μF to 10 000 μF
± 20 %
6.3 WVDC to 450 WVDC 2 axial leads
Life validation test at 85 °C
2000 h: ΔCAP ≤ 20 % from initial measurement.
ΔDF x 2 initial specified limit. ΔDCL ≤ initial specified limit.
Shelf life at 85 °C
1000 h: ΔCAP ± 20 % from initial measurement.
ΔDF 2 x initial specified limit. ΔDCL ≤ the initial specified limit.
DC leakage current
Rated voltage for 1 min for 6.3 WVDC to 100 WVDC units
I < 0.03 CV or 4 μA (whichever is greater) Rated voltage for 2 min for 6.3 WVDC to 100 WVDC units I < 0.01 CV or 3 μA (whichever is greater) Rated voltage for 1 min for 160 WVDC to 450 WVDC units I < 0.1 CV + 40 μA and CV ≤ 1000 I < 0.04 CV + 100 μA and CV > 1000
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE
MULTIPLIERS
≤ +70 °C
1.27
+85 °C
1.0
FREQUENCY (Hz) / CAPACITANCE (μF)
WVDC
CAP. (μF)
50 TO 100 TO 60 120
300 TO 400
1 kHz
≥ 10 kHz
0 to 47 0.75
1
1.35 1.57 2.00
6.3 to 100 to 470 0.80
1
100
1000 to 10 000
0.85
1
1.23 1.34 1.50 1.10 1.13 1.15
160 to 450
1 to 100
0.80
1
1.25 1.40 1.60
LOW TEMPERATURE PERFORMANCE
MAXIMUM IMPEDANCE RATIO Z(T) / Z(+20 °C) MAXIMUM AT 120 Hz
RATED VOLTAGE (WVDC) 6.3 10.0 16.0 25.0
35.0 to 100.0 160.0 to 250.0 315.0 to 350.0 400.0 to 450.0
Z - 25 °C / Z + 20 °C Z - 40 °C / Z + 20 °C
4.0
10.0
3.0
8.0
2.0
6.0
2.0
4.0
2.0
3.0
4.0
12.0
6.0
-
15.0
-
DIMENSIONS in inches [millimeters]
CASE NOMINAL CASE SIZE
LEAD TYPICAL WEIGHT CASE NOMINAL CASE SIZE
LEAD TYPICAL WEIGHT
CODE
DxL
DIAMETER
(g)
CODE
DxL
DIAMETER
(g)
JL 0.197 x 0.472 [5.0 x 12.0] 0.024 [0.6]
0.56
NR 0.394 x 1.023 [10.0 x 26.0] 0.024 [0.6]
3.10
LL 0.248 x 0.472 [6.3 x 12.0] 0.024 [0.6]
0.90
PR 0.512 x 1.023 [13.0 x 26.0] 0.024 [0.6]
4.63
LM 0.248 x 0.630 [6.3 x 16.0] 0.024 [0.6]
1.07
PS 0.512 x 1.240 [13.0 x 31.5] 0.024 [0.6]
5.47
MM 0.315 x 0.630 [8.0 x 16.0] 0.024 [0.6]
1.45
QS 0.630 x 1.240 [16.0 x 31.5] 0.031 [0.8]
8.26
MN 0.315 x 0.787 [8.0 x 20.0] 0.024 [0.6]
1.70
QT 0.630 x 1.633 [16.0 x 41.5] 0.031 [0.8]
10.42
NP 0.394 x 0.827 [10.0 x 21.0] 0.024 [0.6]
2.32
RT 0.709 x 1.614 [18.0 x 41.0] 0.031 [0.8]
12.42
Revision: 04-May-2018
1
Document Number: 42046
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs
www.v.