www.vishay.com
94SVPD
Vishay OS-CON
SMD Aluminum Solid Capacitors with Conductive Polymer
FEATURES
• New OS-CON 94SVPD series provides improved characteristics with up to 125 °C temperature capability and 35 V maximum voltage rating in a SMD package
• Improved damp heat (steady state) 85 °C x 85 % RH performance
• Suitable for use in smoothing circuits of vehicle-mounted equipment, industrial equipment, etc.
• This product can support lead (Pb)-free reflow (2)
• Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION Operating temperature range Capacitance tolerance Tangent of loss angle (tan ) Leakage current (μA/2 min) (or less) (1) ESR Characteristics of impedance ratio at high and low temperature
Endurance
Damp heat (steady state)
Solder heat resistance (2)
CONDITIONS -
120 Hz 120 Hz After 2 min
100 kHz, + 20 °C
+ 125 °C, 2000 h rated voltage applied
+ 85 °C, 85 % to 90 % RH, 1000 h
rated voltage applied
(VPS) (230 °C x 75 s)
VALUE
- 55 °C to + 125 °C
M: ± 20 %
values in Electrical Data and Ordering Information table
values in Electrical Data and Ordering Information table
values in Electrical Data and Ordering Information table
- 55 °C + 125 °C
C/C
Z/Z20 °C
0.75 to 1.25
Z/Z20 °C
0.75 to 1.0
Within ± 20 %
tan
2 x or < than an initial standard
ESR
2 x or < than an initial standard
Leakage current
Below an initial standard
C/C
Within ± 20 %
tan
2 x or < than an initial standard
ESR
2 x or < than an initial standard
Leakage current
Below an initial standard
C/C
Within ± 10 %
tan
1.3 x or < than an initial standard
ESR
1.3 x or < than an initial standard
Leakage current
Below an initial standard (after voltage procesing)
Notes
(1) If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage treatment: The rated voltage is applied (10 V to 35 V) for 120 min at 125 ºC.
(2) Refer to “Recommended Reflow Profile” for maximum temperatures.
DIMENSIONS in millimeters
Series C6 size is PD E7, F8, E12, F12 size is SVPD
Polarity marking (Cathode)
Case No.
003 SVPD
47 35
Rated capacitance Rated voltage
SIZE CODE C6 E7 F8 E12 F12
Ø D ± 0.5 6.3 8.0 10.0 8.0 10.0
L + 0.1/- 0.4 5.9 6.9 7.9 11.9 12.6
W ± 0.2 6.6 8.3 10.3 8.3 10.3
ØD H P C
0.2 max.
W
L
H ± 0.2 6.6 8.3 10.3 8.3 10.3
C ± 0.2 7.3 9.0 11.0 9.0 11.0
R (+)
R 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1
P ± 0.2 2.1 3.2 4.6 3.2 4.6
Revision: 03-Aug-12
1
Document Number: 90022
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
CASE CODE LIST
CAPACITANCE (μF)
8.2 10 18 22 39 47 56 82
10.0 (11.5)
C6
94SVPD
Vishay OS-CON
RATED VOLTAGE (SURGE AT 125 °C)
16.0 (18.4)
25.0 (29.0)
C6
E7 F8 E12
E7
F12
35.0 (40.0)
E7
F8 E12
F12
RECOMMENDED LAND PATTERN DIMENSIONS (in millimeters)
SIZE CODE
a
b
c
C6
2.1
9.1
1.6
c
E7
2.8
11.1
1.9
a
F8
4.3
13.1
1.9
b
E12
2.8
11.1
1.9
F12
4.3
13.1
1.9
FREQUENCY COEFFICIENT FOR RIPPLE CURRENT
FREQUENCY
120 Hz f < 1 kHz
1 kHz f < 10 kHz
COEFFICIENT
0.05
0.3
10 kHz f < 100 kHz 0.7
100 kHz f < 500 kHz 1
ELECTRICAL DATA AND ORDERING INFORMATION
MAX. ESR RATED RIPPLE
ALLOWABLE
UR (V)
CR (μF)
CASE CODE
(100 kHz TO
300 kHz) (m)
CURRENT RIPPLE CURRENT
100 kHz (mA) (3)
105 °C < Tx 125 °C
Tx 105 °C
10
56
C6
45
538
1700
16
82
E7
40
670
2120
10
C6
65
474
1500
22
E7
48
580
1835
25
39
F8
45
664
2100
47
E12
30
943
2980
82
F12
28
1202
3800
8.2
E7
70
400
1300
18
F8
60
550
35
22
E12
50
700
1800 2300
47
F12
30
1150
3650
MAX. TANGENT OF LOSS
ANGLE
0.12 0.12 0.10 0.10 0.10 0.12 0.12 0.10 0.10 0.12 0.12
Notes
(1) Capacitance tolerance: M ± 20 % (2) After 2 min (3) Tx: Ambient temperature
MAX. LEAKAGE CURRENT
(μA) (2)
112 262 50 110 195 235 410 57 126 154 329
PART NUMBER (1)
94SVPD566X0010C6 94SVPD826X0016E7 94SVPD106X0025C6 94SVPD226X0025E7 94SVPD396X0025F8 94SVPD476X0025E12 94SVPD826X0025F12 94SVPD825X0035E7 94SVPD186X0035F8 94SVPD226X0035E12 94SVPD476X0035F12
Revision: 03-Aug-12
2
Document Number: 90022
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
94SVPD
Vishay OS-CON
FREQUENCY CHARACTERISTICS
ESR, Impedance (Ω)
1000
100
5 3
1 10 7
4 16
2 8
0.1
0.01
0.001
0.1
1
Curve 1: 94SVPD476X0035F12 Impedance (Ω) Curve 2: 94SVPD476X0035F12 ESR (Ω) Curve 3: 94SVPD186X0035F8 Impedance (Ω) Curve 4: 94SVPD186X0035F8 ESR (Ω) Curve 5: 94SVPD106X0025C6 Impedance (Ω) Curve .